ALTECH PP-H A 2030/250 GF30 CP Albis Euro Polypropylene, Unspecified (Glass Fiber Reinforcement, 30%)

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Filler / Reinforcement

Glass Fiber Reinforcement, 30% Filler by Weight

Additive

Heat Stabilizer

Features

Chemically Coupled

Heat Stabilized

High Stiffness

Uses

Engineering Parts

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)			ISO 1133
230°C/2.16 kg		g/10 min
230°C/5.0 kg		g/10 min
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Break)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® PP-H A 2030/250 GF30 CP, ALTECH PPH A 2030250 GF30 CP, ALTECH® PP-H , ALTECH PPH, ALTECH® PP:H, ALTECH® PP/H, ALTECH® PP+H, ALTECH® PP_H, ALTECH® PP H, ALTECHPPHA2030250GF30CP, ALTECHPPH, ALTECH PP_H, ALTECH PP H, PP HA 2030 250 GF 30 CP, ALTECHPP_H, A 2030, PP-HA 2030/250 GF30 CP, PPHA 2030250 GF30 CP, PP-HA 2030:250 GF30 CP, PP-HA 2030+250 GF30 CP, PP-HA 2030-250 GF30 CP, PP-HA 2030_250 GF30 CP, PP-HA 2030 250 GF30 CP, PP:HA 2030/250 GF30 CP, PP/HA 2030/250 GF30 CP, PP+HA 2030/250 GF30 CP, PP_HA 2030/250 GF30 CP, PP HA 2030/250 GF30 CP, PPHA, HA2030, PP-HA 2030, PPHA 2030, PP:HA 2030, PP/HA 2030, PP+HA 2030, PP_HA 2030, PP HA 2030, A 2030 250 GF 30 CP, PPHA2030250GF30CP, PPHA 2030_250 GF30 CP, PPHA 2030 250 GF30 CP, PP_HA 2030250 GF30 CP, PP HA 2030250 GF30 CP, PPHA2030, A 2030/250 GF30 CP, A 2030250 GF30 CP, A 2030:250 GF30 CP, A 2030+250 GF30 CP, A 2030-250 GF30 CP, A 2030_250 GF30 CP, A 2030 250 GF30 CP, A2030, 2030250, 250GF, GF30, 30CP, PPHA2030_250GF30CP, PP_HA2030250GF30CP, PP_HA2030, A2030250GF30CP, A2030_250GF30CP, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Albis Euro, PolypropyleneUnspecified, PPUnspecified, 2030A, HAPP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, High Stiffness.
Uses
Uses may also be described by the following terms: Engineering Parts.

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

ALTECH® PP-H A 2030/250 GF30 CP

Polypropylene

Glass Fiber Reinforcement, 30%

Supplied by Albis Plastic GmbH