IDES Prospector Already have an account? Login Here

IDES

ALTECH® PP-H A 2030/252 GF30 CP UV

Polypropylene

Glass Fiber Reinforcement, 30%

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALTECH® PP-H A 2030/252 GF30 CP UV is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Chemically Coupled
  • Good Toughness
  • High Heat Resistance
  • High Rigidity
  
Uses 
  • Engineering Parts
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® PP-H A 2030/252 GF30 CP UV, ALTECH PPH A 2030252 GF30 CP UV, ALTECH® PP-H , ALTECH PPH, ALTECH® PP:H, ALTECH® PP/H, ALTECH® PP+H, ALTECH® PP_H, ALTECH® PP H, ALTECHPPHA2030252GF30CPUV, ALTECHPPH, ALTECH PP_H, ALTECH PP H, PP HA 2030 252 GF 30 CP UV, ALTECHPP_H, A 2030, PP-HA 2030/252 GF30 CP UV, PPHA 2030252 GF30 CP UV, PP-HA 2030:252 GF30 CP UV, PP-HA 2030+252 GF30 CP UV, PP-HA 2030-252 GF30 CP UV, PP-HA 2030_252 GF30 CP UV, PP-HA 2030 252 GF30 CP UV, PP:HA 2030/252 GF30 CP UV, PP/HA 2030/252 GF30 CP UV, PP+HA 2030/252 GF30 CP UV, PP_HA 2030/252 GF30 CP UV, PP HA 2030/252 GF30 CP UV, PPHA, HA2030, PP-HA 2030, PPHA 2030, PP:HA 2030, PP/HA 2030, PP+HA 2030, PP_HA 2030, PP HA 2030, A 2030 252 GF 30 CP UV, PPHA2030252GF30CPUV, PPHA 2030_252 GF30 CP UV, PPHA 2030 252 GF30 CP UV, PP_HA 2030252 GF30 CP UV, PP HA 2030252 GF30 CP UV, PPHA2030, A 2030/252 GF30 CP UV, A 2030252 GF30 CP UV, A 2030:252 GF30 CP UV, A 2030+252 GF30 CP UV, A 2030-252 GF30 CP UV, A 2030_252 GF30 CP UV, A 2030 252 GF30 CP UV, A2030, 2030252, 252GF, GF30, 30CP, CPUV, PPHA2030_252GF30CPUV, PP_HA2030252GF30CPUV, PP_HA2030, A2030252GF30CPUV, A2030_252GF30CPUV, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Albis Euro, PolypropyleneUnspecified, PPUnspecified, 2030A, HAPP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Rigidity, High Heat Resistance, Good Toughness, Tough.
Uses
Uses may also be described by the following terms: Engineering Parts.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.