ALTECH PP-H A 2030/750 GF30 CP Albis Euro Polypropylene, Unspecified (Glass Fiber Reinforcement, 30%)

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Filler / Reinforcement

Glass Fiber Reinforcement, 30% Filler by Weight

Features

Chemically Coupled

Good Toughness

High Heat Resistance

High Rigidity

Uses

Automotive Under the Hood

Engineering Parts

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)		in³/10min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Break)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 358/300)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® PP-H A 2030/750 GF30 CP, ALTECH PPH A 2030750 GF30 CP, ALTECH® PP-H , ALTECH PPH, ALTECH® PP:H, ALTECH® PP/H, ALTECH® PP+H, ALTECH® PP_H, ALTECH® PP H, ALTECHPPHA2030750GF30CP, ALTECHPPH, ALTECH PP_H, ALTECH PP H, PP HA 2030 750 GF 30 CP, ALTECHPP_H, A 2030, PP-HA 2030/750 GF30 CP, PPHA 2030750 GF30 CP, PP-HA 2030:750 GF30 CP, PP-HA 2030+750 GF30 CP, PP-HA 2030-750 GF30 CP, PP-HA 2030_750 GF30 CP, PP-HA 2030 750 GF30 CP, PP:HA 2030/750 GF30 CP, PP/HA 2030/750 GF30 CP, PP+HA 2030/750 GF30 CP, PP_HA 2030/750 GF30 CP, PP HA 2030/750 GF30 CP, PPHA, HA2030, PP-HA 2030, PPHA 2030, PP:HA 2030, PP/HA 2030, PP+HA 2030, PP_HA 2030, PP HA 2030, A 2030 750 GF 30 CP, PPHA2030750GF30CP, PPHA 2030_750 GF30 CP, PPHA 2030 750 GF30 CP, PP_HA 2030750 GF30 CP, PP HA 2030750 GF30 CP, PPHA2030, A 2030/750 GF30 CP, A 2030750 GF30 CP, A 2030:750 GF30 CP, A 2030+750 GF30 CP, A 2030-750 GF30 CP, A 2030_750 GF30 CP, A 2030 750 GF30 CP, A2030, 2030750, 750GF, GF30, 30CP, PPHA2030_750GF30CP, PP_HA2030750GF30CP, PP_HA2030, A2030750GF30CP, A2030_750GF30CP, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Albis Euro, PolypropyleneUnspecified, PPUnspecified, 2030A, HAPP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Rigidity, High Heat Resistance, Good Toughness, Tough.
Uses
Uses may also be described by the following terms: Engineering Parts.

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

ALTECH® PP-H A 2030/750 GF30 CP

Polypropylene

Glass Fiber Reinforcement, 30%

Supplied by Albis Plastic GmbH