IDES Prospector Already have an account? Login Here

IDES

ALTECH® PP-H A 2035/500 GF35

Polypropylene

Glass Fiber Reinforcement, 35%

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALTECH® PP-H A 2035/500 GF35 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 35% Filler by Weight
Features 
  • Low Emissions
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Break)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Strength
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® PP-H A 2035/500 GF35, ALTECH PPH A 2035500 GF35, ALTECH® PP-H , ALTECH PPH, ALTECH® PP:H, ALTECH® PP/H, ALTECH® PP+H, ALTECH® PP_H, ALTECH® PP H, ALTECHPPHA2035500GF35, ALTECHPPH, ALTECH PP_H, ALTECH PP H, PP HA 2035 500 GF 35, ALTECHPP_H, A 2035, PP-HA 2035/500 GF35, PPHA 2035500 GF35, PP-HA 2035:500 GF35, PP-HA 2035+500 GF35, PP-HA 2035-500 GF35, PP-HA 2035_500 GF35, PP-HA 2035 500 GF35, PP:HA 2035/500 GF35, PP/HA 2035/500 GF35, PP+HA 2035/500 GF35, PP_HA 2035/500 GF35, PP HA 2035/500 GF35, PPHA, HA2035, PP-HA 2035, PPHA 2035, PP:HA 2035, PP/HA 2035, PP+HA 2035, PP_HA 2035, PP HA 2035, A 2035 500 GF 35, PPHA2035500GF35, PPHA 2035_500 GF35, PPHA 2035 500 GF35, PP_HA 2035500 GF35, PP HA 2035500 GF35, PPHA2035, A 2035/500 GF35, A 2035500 GF35, A 2035:500 GF35, A 2035+500 GF35, A 2035-500 GF35, A 2035_500 GF35, A 2035 500 GF35, A2035, 2035500, 500GF, GF35, PPHA2035_500GF35, PP_HA2035500GF35, PP_HA2035, A2035500GF35, A2035_500GF35, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Albis Euro, PolypropyleneUnspecified, PPUnspecified, 2035A, HAPP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Low Emissions.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.