ALTECH PP-H A 3020/100GB20 Albis Euro Polypropylene, Unspecified (Glass Bead, 20%)

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Filler / Reinforcement

Glass Bead, 20% Filler by Weight

Additive

Heat Stabilizer

Features

Heat Stabilized

Low Warpage

Uses

Housings

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Break)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B
Melting Temperature		°F	ISO 11357-3
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® PP-H A 3020/100GB20, ALTECH PPH A 3020100GB20, ALTECH® PP-H , ALTECH PPH, ALTECH® PP:H, ALTECH® PP/H, ALTECH® PP+H, ALTECH® PP_H, ALTECH® PP H, ALTECHPPHA3020100GB20, ALTECHPPH, ALTECH PP_H, ALTECH PP H, PP HA 3020 100 GB 20, ALTECHPP_H, A 3020, PP-HA 3020/100GB20, PPHA 3020100GB20, PP-HA 3020:100GB20, PP-HA 3020+100GB20, PP-HA 3020-100GB20, PP-HA 3020_100GB20, PP-HA 3020 100GB20, PP:HA 3020/100GB20, PP/HA 3020/100GB20, PP+HA 3020/100GB20, PP_HA 3020/100GB20, PP HA 3020/100GB20, PPHA, HA3020, PP-HA 3020, PPHA 3020, PP:HA 3020, PP/HA 3020, PP+HA 3020, PP_HA 3020, PP HA 3020, A 3020 100 GB 20, PPHA3020100GB20, PPHA 3020_100GB20, PPHA 3020 100GB20, PP_HA 3020100GB20, PP HA 3020100GB20, PPHA3020, A 3020/100GB20, A 3020100GB20, A 3020:100GB20, A 3020+100GB20, A 3020-100GB20, A 3020_100GB20, A 3020 100GB20, A3020, 3020100, 100GB, GB20, PPHA3020_100GB20, PP_HA3020100GB20, PP_HA3020, A3020100GB20, A3020_100GB20, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Albis Euro, PolypropyleneUnspecified, PPUnspecified, 3020A, HAPP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Low Warpage, Low Warp.
Uses
Uses may also be described by the following terms: Housings, Housing.

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

ALTECH® PP-H A 3020/100GB20

Polypropylene

Glass Bead, 20%

Supplied by Albis Plastic GmbH