IDES Prospector Already have an account? Login Here

IDES

ALTECH® PP-H A 3020/500 GB20

Polypropylene

Glass Bead, 20%

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALTECH® PP-H A 3020/500 GB20 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Bead, 20% Filler by Weight
Features 
  • Low Warpage
Uses 
  • Housings
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Break)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Strength
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® PP-H A 3020/500 GB20, ALTECH PPH A 3020500 GB20, ALTECH® PP-H , ALTECH PPH, ALTECH® PP:H, ALTECH® PP/H, ALTECH® PP+H, ALTECH® PP_H, ALTECH® PP H, ALTECHPPHA3020500GB20, ALTECHPPH, ALTECH PP_H, ALTECH PP H, PP HA 3020 500 GB 20, ALTECHPP_H, A 3020, PP-HA 3020/500 GB20, PPHA 3020500 GB20, PP-HA 3020:500 GB20, PP-HA 3020+500 GB20, PP-HA 3020-500 GB20, PP-HA 3020_500 GB20, PP-HA 3020 500 GB20, PP:HA 3020/500 GB20, PP/HA 3020/500 GB20, PP+HA 3020/500 GB20, PP_HA 3020/500 GB20, PP HA 3020/500 GB20, PPHA, HA3020, PP-HA 3020, PPHA 3020, PP:HA 3020, PP/HA 3020, PP+HA 3020, PP_HA 3020, PP HA 3020, A 3020 500 GB 20, PPHA3020500GB20, PPHA 3020_500 GB20, PPHA 3020 500 GB20, PP_HA 3020500 GB20, PP HA 3020500 GB20, PPHA3020, A 3020/500 GB20, A 3020500 GB20, A 3020:500 GB20, A 3020+500 GB20, A 3020-500 GB20, A 3020_500 GB20, A 3020 500 GB20, A3020, 3020500, 500GB, GB20, PPHA3020_500GB20, PP_HA3020500GB20, PP_HA3020, A3020500GB20, A3020_500GB20, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Albis Euro, PolypropyleneUnspecified, PPUnspecified, 3020A, HAPP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Low Warpage, Low Warp.
Uses
Uses may also be described by the following terms: Housings, Housing.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.