ALTECH PP-H A 3030/100 GB20 Albis Euro Polypropylene, Unspecified (Glass Bead, 30%)

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Filler / Reinforcement

Glass Bead, 30% Filler by Weight

Additive

Heat Stabilizer

Features

Heat Stabilized

Low Warpage

Uses

Electrical/Electronic Applications

Pump Parts

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)		in³/10min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Break)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® PP-H A 3030/100 GB20, ALTECH PPH A 3030100 GB20, ALTECH® PP-H , ALTECH PPH, ALTECH® PP:H, ALTECH® PP/H, ALTECH® PP+H, ALTECH® PP_H, ALTECH® PP H, ALTECHPPHA3030100GB20, ALTECHPPH, ALTECH PP_H, ALTECH PP H, PP HA 3030 100 GB 20, ALTECHPP_H, A 3030, PP-HA 3030/100 GB20, PPHA 3030100 GB20, PP-HA 3030:100 GB20, PP-HA 3030+100 GB20, PP-HA 3030-100 GB20, PP-HA 3030_100 GB20, PP-HA 3030 100 GB20, PP:HA 3030/100 GB20, PP/HA 3030/100 GB20, PP+HA 3030/100 GB20, PP_HA 3030/100 GB20, PP HA 3030/100 GB20, PPHA, HA3030, PP-HA 3030, PPHA 3030, PP:HA 3030, PP/HA 3030, PP+HA 3030, PP_HA 3030, PP HA 3030, A 3030 100 GB 20, PPHA3030100GB20, PPHA 3030_100 GB20, PPHA 3030 100 GB20, PP_HA 3030100 GB20, PP HA 3030100 GB20, PPHA3030, A 3030/100 GB20, A 3030100 GB20, A 3030:100 GB20, A 3030+100 GB20, A 3030-100 GB20, A 3030_100 GB20, A 3030 100 GB20, A3030, 3030100, 100GB, GB20, PPHA3030_100GB20, PP_HA3030100GB20, PP_HA3030, A3030100GB20, A3030_100GB20, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Albis Euro, PolypropyleneUnspecified, PPUnspecified, 3030A, HAPP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Low Warpage, Low Warp.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

ALTECH® PP-H A 3030/100 GB20

Polypropylene

Glass Bead, 30%

Supplied by Albis Plastic GmbH