IDES Prospector Already have an account? Login Here

IDES

Lanufene HDI-6507UV

High Density Polyethylene

Supplied by Ras Lanuf Oil & Gas Processing Company (RASCO)

The technical datasheet with complete property values for Lanufene HDI-6507UV is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LANUFENE HDI 6507UV is a very high density polyethylene resin for injection molding of products with excellent high mechanical properties and good process-ability as the main characteristics.
LANUFENE HDI 6507UV contains proper UV light stabilizers. The injection molded product from this resin characteristically exhibits good rigidity, excellent UV resistance, and outstanding mechanical properties.

LANUFENE HDI 6507UV is particularly suitable for the manufacture of crates, containers, trays and other similar injection molded objectives where good weather-ability and mechanical properties are needed.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  
Additive 
  • UV Stabilizer
Features 
  • Food Contact Acceptable
  • Good Processability
  • Good UV Resistance
  • Good Weather Resistance
  • High Density
  • High Rigidity
Uses 
  • Containers
  • Crates
  • Support Trays
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance 2 (122°F, 100% Igepal, F50)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Ultimate)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Lanufene HDI-6507UV, Lanufene HDI6507UV, Lanufene , LanufeneHDI6507UV, HDI, HDI 6507 UV, HDI-6507UV, HDI6507UV, HDI:6507UV, HDI/6507UV, HDI+6507UV, HDI_6507UV, HDI 6507UV, HDI6507, 6507UV, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, RASCO, PolyethyleneHighDensity, 6507HDI
Features
Features may also be described by the following terms: High Density, High Specific Gravity, High Rigidity, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Good Processability, Easy Processing, Good Weather Resistance, Weather Resistant.
Uses
Uses may also be described by the following terms: Support Trays.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Non-slitted
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.