IDES Prospector Already have an account? Login Here

IDES

Lanufene LLF 182H

Linear Low Density Polyethylene

Supplied by Ras Lanuf Oil & Gas Processing Company (RASCO)

The technical datasheet with complete property values for Lanufene LLF 182H is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LANUFENE LLF 182H is a linear low density polyethylene for general purpose blown film extrusion with high mechanical properties and good process-ability. LANUFENE LLF 182H contains slip additive and anti-blocking agent. The film produced from this resin characteristically exhibits good toughness, high tensile properties, outstanding puncture resistance and good optical properties.

LANUFENE LLF 182H is recommended for the manufacture of thin gauged general purpose blown films such as industrial liners, food packaging and agricultural mulching film.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  
Additive 
  • Antiblock
  • Slip
  
Features 
  • Antiblocking
  • Food Contact Acceptable
  • Good Processability
  • Good Toughness
  • High Tensile Strength
  • Opticals
  • Puncture Resistant
  • Slip
Uses 
  • Agricultural Applications
  • Film
  • Food Packaging
  • Liners
  
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Film Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Ultimate)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
1% Secant, MD: 1.5 mil
psi
  
1% Secant, TD: 1.5 mil
psi
  
Tensile Strength
     ASTM D882
MD: Break, 1.5 mil
psi
  
TD: Break, 1.5 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 1.5 mil
%
  
TD: Break, 1.5 mil
%
  
Dart Drop Impact (1.5 mil)
g
 ASTM D1709A
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.50 mil)
 
 ASTM D2457
Haze (1.50 mil)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Lanufene LLF 182H, Lanufene , LanufeneLLF182H, LLF 182 H, LLF 182H, LLF182, 182H, LLF182H, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, RASCO, PolyethyleneLinearLowDensity, 182LLF
Features
Features may also be described by the following terms: High Tensile Strength, Good Toughness, Tough, Antiblocking, Unspecified Antiblock, Good Processability, Easy Processing, Slip, Unspecified Slip, Good Puncture Resistance, Puncture Resistant.
Uses
Uses may also be described by the following terms: Food Packaging.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.