IDES Prospector Already have an account? Login Here

IDES

K-Resin® SBC KR99HG

Styrene Butadiene Block Copolymer

Supplied by Chevron Phillips Chemical Company LLC

The technical datasheet with complete property values for K-Resin® SBC KR99HG is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Customer Benefits Typical Applications
  • Excellent Clarity
  • Good Stiffness
  • Good Toughness
  • High Surface Gloss
  • Can be Blended with Polystyrene

Typical Applications
  • Garment Hangers
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Features 
  • Copolymer
  • Good Stiffness
  • Good Toughness
  • High Clarity
  • High Gloss
Uses 
  • Blending
  • Consumer Applications
  
Agency Ratings 
 
Appearance 
  • Clear/Transparent
Processing Method 
  • Blow Molding
  • Extrusion
  • Injection Molding
  • Thermoforming
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Yield)
%
 ASTM D638
Flexural Modulus 3
psi
 ASTM D790
Flexural Strength 3 (Yield)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Instrumented Dart Impact 4 (73°F, 0.125 in, Total Energy)
in·lb
 ASTM D3763
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525
Optical
Nominal Value
Unit
Test Method
Gloss (60°)
 
 ASTM D2457
Transmittance
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: K-Resin® SBC KR99HG, KResin SBC KR99HG, K-Resin® SBC , KResin SBC, K:Resin® SBC, K/Resin® SBC, K+Resin® SBC, K_Resin® SBC, K Resin® SBC, KResinSBCKR99HG, KResinSBC, K_Resin SBC, K Resin SBC, SBCKR 99 HG, K_ResinSBC, SBCKR99HG, SBCKR99, SBC, KR 99 HG, KR99HG, KR99, 99HG, Styrene Butadiene Block Copolymer, Thermoplastic Elastomer, TPE, sb, CP Chem, StyreneButadieneBlockCopolymer, ThermoplasticElastomer, 99KR, 99SBCKR
Features
Features may also be described by the following terms: High Clarity, Good Stiffness, Good Toughness, Tough, High Gloss.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), USP (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 2.0 in/min
31.0 in/min
412.5 ft/sec
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.