IDES Prospector Already have an account? Login Here

IDES

COTENE™ 9062

Linear Low Density Polyethylene

Supplied by ICO Asia Pacific

The technical datasheet with complete property values for COTENE™ 9062 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
COTENE™ 9062 is a linear low density polyethylene powder offering a unique blend of properties which makes this resin ideal for moulding products that require a high degree of abrasion resistance and impact toughness. COTENE™ 9062 contains a fully formulated UV stabilisation package (with a minimum UV8 rating). It is important that this grade is cured optimally as the low MFI may otherwise result in a rough inside finish.

The base resin in COTENE™ 9062 is suitable for food contact applications. For detailed information on compliance to specific standards please contact your account manager.

COTENE™ 9062 is available in custom colours on request.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • UV Stabilizer
Features 
  • Food Contact Acceptable
  • Good Abrasion Resistance
  • Good Flexibility
  • Good Impact Resistance
  • Good Toughness
  • Good UV Resistance
Uses 
  • Containers
  • Marine Applications
  • Toys
Appearance 
  • Colors Available
Forms 
  • Powder
Processing Method 
  • Rotational Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Impact
Nominal Value
Unit
Test Method
Impact Strength (-40°F, 0.20 in)
ft·lb
 ARM
Additional Information
Nominal Value
Unit
Test Method
UV Rating 3
month
 ASTM 2565
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: COTENE™ 9062, COTENE 9062, COTENE™ , COTENE, COTENE9062, 9062, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, ICO Asia Pacific, PolyethyleneLinearLowDensity
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Good Impact Resistance, Good Flexibility, Flexible, Good Abrasion Resistance, Abrasion Resistant, Good Toughness, Tough.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
350% Retained Tensile Elongation
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.