IDES Prospector Already have an account? Login Here

IDES

ExxonMobil™ PP1074KNE1

Polypropylene Homopolymer

Supplied by ExxonMobil Chemical

The technical datasheet with complete property values for ExxonMobil™ PP1074KNE1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
A nucleated, medium melt flow rate homopolymer resin with mold release and anti-static properties. It is suitable for general purpose injection molding.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Autoclave Sterilizable
  • Ethylene Oxide Sterilizable
  • Good Creep Resistance
  • Good Mold Release
  • Good Stiffness
  • Steam Sterilizable
Uses 
  • Bottles
  • Caps
  • Closures
  • Consumer Applications
  • Packaging
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
ASTM D638
Tensile Elongation 2 (Yield)
%
ASTM D638
Flexural Modulus - 1% Secant
     
-- 3
psi
ASTM D790A
-- 4
psi
ASTM D790B
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
ASTM D648
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product, including the product name, shall not be used or tested in any medical application without the prior written acknowledgement of ExxonMobil Chemical as to the intended use.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES

Product names can be difficult to match. You may have searched any one of these terms to find this product: ExxonMobil™ PP1074KNE1, ExxonMobil PP1074KNE1, ExxonMobil™ , ExxonMobil, ExxonMobilPP1074KNE1, PP 1074 KNE 1, PP1074KNE1, PP1074, 1074KNE, KNE1, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, PolypropyleneHomopolymer, PPHomopolymer, 1074PP
Features
Features may also be described by the following terms: Good Creep Resistance, Creep Resistant, Good Mold Release, Easy Release, Good Demolding, Autoclave Sterilization, Autoclave Sterilizable, Ethylene Oxide Sterilizable, EtO Sterilizable, EtO Sterilization, Ethylene Oxide Sterilizable, Steam Sterilization, Steam Sterilizable, Good Stiffness.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.050 in/min
40.50 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.