IDES Prospector Already have an account? Login Here

IDES

ExxonMobil™ PP5341E1

Polypropylene Homopolymer

Supplied by ExxonMobil Chemical

The technical datasheet with complete property values for ExxonMobil™ PP5341E1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
A low melt flow rate homopolymer resin that provides high melt strength and resistance to softening at elevated temperature.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Low Flow
Uses 
  • Automotive Applications
  • Industrial Applications
  
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Compounding
  • Injection Molding
  • Sheet Extrusion
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Yield)
%
 ASTM D638
Flexural Modulus - 1% Secant
      
-- 3
psi
 ASTM D790A
-- 4
psi
 ASTM D790B
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product, including the product name, shall not be used or tested in any medical application without the prior written acknowledgement of ExxonMobil Chemical as to the intended use.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES

Product names can be difficult to match. You may have searched any one of these terms to find this product: ExxonMobil™ PP5341E1, ExxonMobil PP5341E1, ExxonMobil™ , ExxonMobil, ExxonMobilPP5341E1, PP 5341 E 1, PP5341E1, PP5341, 5341E, E1, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, PolypropyleneHomopolymer, PPHomopolymer, 5341PP
Features
Features may also be described by the following terms: Low Flow, Low Melt, Low MFI.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.050 in/min
40.50 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.