IDES Prospector Already have an account? Login Here

IDES

ExxonMobil™ PP7011L1

Polypropylene Impact Copolymer

Supplied by ExxonMobil Chemical

The technical datasheet with complete property values for ExxonMobil™ PP7011L1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
An impact copolymer resin for extrusion applications with high melt viscosity and excellent low-temperature impact strength. It is suitable for cables, pipes, profiles, sheets and thermoforming.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  
Features 
  • High Impact Resistance
  • Low Flow
  
Uses 
  • Compounding
  • Corrugated Pipe
  • Electrical/Electronic Applications
  • Industrial Applications
  
Automotive Specifications 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Extrusion Blow Molding
  • Injection Molding
  • Profile Extrusion
  • Sheet Extrusion
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR)
     ISO 1133
230°C/2.16 kg
g/10 min
  
230°C/5.0 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus - Secant
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Flexural Modulus - Secant
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F
ft·lb/in²
  
32°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/1A
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/A50
Melting Temperature (DSC)
°F
 ISO 3146
Peak Crystallization Temperature (DSC)
°F
 ISO 3146
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES

Product names can be difficult to match. You may have searched any one of these terms to find this product: ExxonMobil™ PP7011L1, ExxonMobil PP7011L1, ExxonMobil™ , ExxonMobil, ExxonMobilPP7011L1, PP 7011 L 1, PP7011L1, PP7011, 7011L, L1, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, PP, PolypropyleneImpactCopolymer, PPImpactCopolymer, 7011PP
Features
Features may also be described by the following terms: Low Flow, Low Melt, Low MFI, High Impact Resistance.
Uses
Uses may also be described by the following terms: Compounding, Compounds, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Corrugated Pipe.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): DAIMLERCHRYSLER (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.