|
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
|
|
g/10 min
|
ASTM D1238 |
|
Tensile Strength 2 (Yield)
|
|
psi
|
ASTM D638 |
|
Tensile Elongation 2 (Yield)
|
|
%
|
ASTM D638 |
|
Flexural Modulus - 1% Secant 3
|
|
psi
|
ASTM D790A |
|
Notched Izod Impact (73°F)
|
|
ft·lb/in
|
ASTM D256A |
|
Deflection Temperature Under Load (66 psi, Unannealed)
|
|
°F
|
ASTM D648 |
|
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
This product, including the product name, shall not be used or tested in any medical application without the prior written acknowledgement of ExxonMobil Chemical as to the intended use.
|
|
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES
Product names can be difficult to match. You may have searched any one of these terms to find this product: Achieve™ 1605, Achieve 1605, Achieve™ , Achieve, Achieve1605, 1605, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, ExxonMobil, PolypropyleneHomopolymer, PPHomopolymer
|
|
Features may also be described by the following terms: Low Emissions, Low Extractables, Good Organoleptic Properties, Autoclave Sterilization, Autoclave Sterilizable, Ethylene Oxide Sterilizable, EtO Sterilizable, EtO Sterilization, Ethylene Oxide Sterilizable, Steam Sterilization, Steam Sterilizable.
|
|
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Medical Applications, Medical Packaging.
|