IDES Prospector Already have an account? Login Here

IDES

Ultrason® S 2010 NAT

Polysulfone

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultrason® S 2010 NAT is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Unreinforced, medium viscosity standard injection moulding grade.
Abbreviated designation according to ISO 1043-1: PSU
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • High Rigidity
  • High Strength
  • Medium Viscosity
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Apparent Density
g/cm³
 ISO 60
Melt Volume-Flow Rate (MVR) (360°C/10.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage
     ISO 294-4
Across Flow
%
  
Flow
%
  
Water Absorption
     ISO 62
73°F, 24 hr
%
  
Equilibrium, 73°F, 50% RH
%
  
Viscosity Number
cm³/g
 ISO 307
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Tensile Creep Modulus 2 (1000 hr)
psi
 ISO 899-1
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
 
  
73°F
 
  
Notched Izod Impact Strength
     ISO 180/A
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Glass Transition Temperature
°F
 ISO 11357-2
CLTE
      
Flow: 73 to 176°F
in/in/°F
 ISO 11359-2
Transverse: 284°F
in/in/°F
 DIN 53752
Service Temperature 3
°F
 Internal Method
Aging
Nominal Value
Unit
Test Method
Change in Tensile Stress (320°F, 20000 hr)
%
 IEC 60216
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Comparative Tracking Index
     IEC 60112
Solution A
V
  
Solution B
V
  
Electric Strength 4
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0630 in
 
  
0.126 in
 
  
Optical
Nominal Value
Unit
Test Method
Refractive Index
 
 ISO 489
Transmittance
%
 DIN 5036-3
Additional Information
Nominal Value
Unit
Test Method
Polymer Abbreviation
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultrason® S 2010 NAT, Ultrason S 2010 NAT, Ultrason® S , Ultrason S, UltrasonS2010NAT, UltrasonS, S 2010 NAT, S2010 NAT, S2010, S2010NAT, 2010 NAT, 2010NAT, Polysulfone, PSU, BASF, NAT2010, 2010S
Features
Features may also be described by the following terms: High Rigidity, High Strength, Medium Viscosity.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
223°C, Strain < 0.5%
3Short cycle operation
4K20/K20
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.