IDES Prospector Already have an account? Login Here

IDES

KYDEX® XD MB

Acrylic (PMMA) + PVC

Supplied by KYDEX, LLC.

The technical datasheet with complete property values for KYDEX® XD MB is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
KYDEX® XD MB is a thermoplastic 3D laminate giving designers the ability to incorporate compound corners, logos, and wire managment holes while eliminating unsightly seams and the need for edgebanding typically associated with HPL/TFM surfaces. Its integral colour and superior impact resistance minimizes costly maintenance associated with other laminates. Microban® protection is built-in to continously fight the growth of microbes.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Bacteria Resistant
  • Durable
  • Flame Retardant
  • Good Abrasion Resistance
  • Good Chemical Resistance
  • Good Flexibility
  • Good Processability
  • Good Toughness
  • High Impact Resistance
  • Low Moisture Absorption
  • Microbe Resistant
  • Scratch Resistant
Uses 
  • Counter Top Flatstocks
  • Decorative Displays
  • Fascias
  • Laminates
  • Reinforced Panels
  • Table Products
Appearance 
  • Colors Available
Forms 
  • Sheet
Processing Method 
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.125 in)
psi
 ASTM D638
Tensile Strength (0.125 in)
psi
 ASTM D638
Tensile Elongation (Break, 0.125 in)
%
 ASTM D638
Flexural Modulus (0.125 in)
psi
 ASTM D790
Flexural Strength (0.125 in)
psi
 ASTM D790
Taber Abrasion Resistance (1000 Cycles, 500 g, CS-10F Wheel)
mg
 ASTM D1044
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.0400 in)
ft·lb/in
 ASTM D256
Drop Impact Resistance (40.2 mil)
 
 Internal Method
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale, 0.125 in)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
264 psi, Unannealed
°F
  
264 psi, Annealed, 0.125 in
°F
  
Additional Information
Nominal Value
Unit
Test Method
Ball Impact Resistance (40.2 mil)
 
 Internal Method
Cleanability
 
 Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: KYDEX® XD MB, KYDEX XD MB, KYDEX® , KYDEX, KYDEXXDMB, XD MB, XDMB, Acrylic + PVC, Acrylic PVC, Acrylic (PMMA) + PVC, Acrylic PMMA PVC, Acrylic (PMMA) : PVC, Acrylic : PVC, Acrylic (PMMA) / PVC, Acrylic / PVC, Acrylic (PMMA) - PVC, Acrylic - PVC, Acrylic (PMMA) _ PVC, Acrylic _ PVC, Acrylic _ PVC, Acrylic (PMMA) PVC, Acrylic PVC, PMMA+PVC, PMMAPVC, PMMA:PVC, PMMA/PVC, PMMA-PVC, PMMA_PVC, PMMA PVC, Acrylic, AcrylicPMMAPVC, Acrylic PMMA _ PVC, AcrylicPMMA_PVC, MBXD
Features
Features may also be described by the following terms: Good Toughness, Tough, Good Chemical Resistance, Chemical Resistant, Scratch Resistant, Resists Scratches, Good Abrasion Resistance, Abrasion Resistant, Good Flexibility, Flexible, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, Good Processability, Easy Processing, High Impact Resistance.
Uses
Uses may also be described by the following terms: Counter Top Flatstocks, Countertop Flatstocks, Decorative Displays, Reinforced Panels, Reinforced Panel.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.