IDES Prospector Already have an account? Login Here

IDES

AvaSpire® AV-722

Polyaryletherketone

Supplied by Solvay Specialty Polymers

The technical datasheet with complete property values for AvaSpire® AV-722 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
AvaSpire AV-722 is an unreinforced polyaryletherketone (PAEK) that offers improved economics relative to PEEK while retaining most of PEEK's key performance attributes. AV-722 resin has been formulated for applications requiring high chemical resistance and mechanical strength along with low moisture absorption and good barrier properties. These and other properties make this resin well-suited for applications in healthcare, transportation, electronics, chemical processing and other industries.

  • Beige: AvaSpire AV-722 BG 20
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Features 
  • Ductile
  • Flame Retardant
  • Good Chemical Resistance
  • Good Dimensional Stability
  • Good Impact Resistance
  • High Heat Resistance
Uses 
  • Aircraft Applications
  • Automotive Applications
  • Electrical/Electronic Applications
  • Film
  • Fuel Lines
  • Gears
  • Medical/Healthcare Applications
  • Oil/Gas Applications
  • Seals
RoHS Compliance 
Appearance 
  • Beige
Forms 
  • Pellets
Processing Method 
  • Extrusion Blow Molding
  • Fiber (Spinning) Extrusion
  • Film Extrusion
  • Injection Blow Molding
  • Injection Molding
  • Machining
  • Profile Extrusion
  • Thermoforming
  • Wire & Cable Extrusion
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Viscosity vs. Shear Rate (ISO 11403-2)
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (400°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage 2
     ASTM D955
Flow: 0.125 in
in/in
  
Across Flow: 0.125 in
in/in
  
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 3
psi
 ASTM D638
--
psi
 ISO 527-2/1A/1
Tensile Stress
      
Yield
psi
 ISO 527-2/1A/50
-- 3
psi
 ASTM D638
Tensile Elongation
      
Yield 3
%
 ASTM D638
Yield
%
 ISO 527-2/1A/50
Break 3
%
 ASTM D638
Break
%
 ISO 527-2/1A/50
Flexural Modulus
      
--
psi
 ASTM D790
--
psi
 ISO 178
Flexural Strength
      
--
psi
 ASTM D790
--
psi
 ISO 178
Compressive Strength
psi
 ASTM D695
Shear Strength
psi
 ASTM D732
Poisson's Ratio
 
 ASTM E132
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
      
--
ft·lb/in
 ASTM D256
--
ft·lb/in²
 ISO 180
Unnotched Izod Impact
 
 ASTM D4812, ISO 180
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load 4 (264 psi, Annealed, 0.126 in)
°F
 ASTM D648
Glass Transition Temperature (DSC)
°F
 ASTM D3418
Peak Melting Temperature 5
°F
 ASTM D3418
CLTE - Flow (-58 to 122°F)
in/in/°F
 ASTM E831
Specific Heat
     DSC
122°F
Btu/lb/°F
  
392°F
Btu/lb/°F
  
Thermal Conductivity
Btu·in/hr/ft²/°F
 ASTM E1530
Electrical
Nominal Value
Unit
Test Method
Dielectric Strength
     ASTM D149
0.00197 in 6
V/mil
  
0.118 in
V/mil
  
Dielectric Constant
     ASTM D150
60 Hz
 
  
1 MHz
 
  
Dissipation Factor
     ASTM D150
60 Hz
 
  
1 MHz
 
  
Flammability
Nominal Value
Unit
Test Method
Oxygen Index
%
 ASTM D2863
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity (752°F, 1000 sec^-1)
Pa·s
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AvaSpire® AV-722, AvaSpire AV722, AvaSpire® , AvaSpire, AvaSpireAV722, AV, AV-722, AV722, AV:722, AV/722, AV+722, AV_722, AV 722, Polyaryletherketone, PAEK, Solvay Specialty, 722AV
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Dimensional Stability, Dimensionally Stable, High Heat Resistance, Good Impact Resistance.
Uses
Uses may also be described by the following terms: Medical Applications, Automotive Applications, Automotive Sector, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Oil Applications, Gas Applications.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Screw Compression Ratio
 
  
Injection Notes
Back Pressure: Minimum
Notes
1Typical properties: these are not to be construed as specifications.
25" x 0.5" x 0.125"
32.0 in/min
42 hours at 200°C
5For major component
6Amorphous
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.