IDES Prospector Already have an account? Login Here

IDES

Ultrason® E 2010 G6 SW 15038

Polyethersulfone

Glass Fiber Reinforcement, 30%

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultrason® E 2010 G6 SW 15038 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Medium viscosity injection moulding grade with high rigidity and strength, 30 % glass fiber reinforced.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • High Rigidity
  • High Strength
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  
Resin ID (ISO 1043)
  • PESU-GF30
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Apparent Density
g/cm³
 ISO 60
Melt Volume-Flow Rate (MVR) (360°C/10.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage
     ISO 294-4
Across Flow
%
  
Flow
%
  
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Viscosity Number
cm³/g
 ISO 307
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/1A
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 961/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Glass Transition Temperature
°F
 ISO 11357-2
CLTE - Flow
      
73 to 176°F
in/in/°F
 ISO 11359-2
356°F
in/in/°F
 DIN 53752
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultrason® E 2010 G6 SW 15038, Ultrason E 2010 G6 SW 15038, Ultrason® E , Ultrason E, UltrasonE2010G6SW15038, UltrasonE, E 2010 G 6 SW 15038, E2010 G6 SW 15038, E2010, 2010 G 6 SW 15038, E2010G6SW15038, 2010 G6 SW 15038, 2010G, G6, 6SW, SW15038, 2010G6SW15038, Polyethersulfone, PESU, Polysulfone, PSU, BASF, G2010, 2010E
Features
Features may also be described by the following terms: High Rigidity, High Strength.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.