IDES Prospector Already have an account? Login Here

IDES

BorPlus™ SE525MO

Polypropylene

Supplied by Borealis AG

The technical datasheet with complete property values for BorPlus™ SE525MO is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BorPlus SE525MO is a black polypropylene for rotational moulding applications. The grade is specially designed to enhance low temperature impact properties and to decrease warpage. The product is delivered as powder.

Applications:
BorPlus SE525MO is suitable for rotational moulding of products for high temperature and high stiffness
applications such as:
Underground applications
Automotive under the bonnet parts
Parts for pipe systems

Additives:
BorPlus SE525MO The additivation is specially formulated for rotational moulding.

Special features:
Low temperature impact
Good stiffness
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Good Stiffness
  • High Heat Resistance
  • Low Temperature Impact Resistance
  • Recyclable Material
  • Warp Resistant
Uses 
  • Automotive Applications
  • Automotive Under the Hood
  
Appearance 
  • Black
Forms 
  • Powder
Processing Method 
  • Rotational Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Environmental Stress-Cracking Resistance (10% Igepal)
hr
 ASTM D1693A
Full Notch Creep Test 2 (122°F)
day
 ISO 16770
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Compression Molded)
psi
 ISO 527-2/1
Tensile Stress (Yield, Compression Molded)
psi
 ISO 527-2/50
Tensile Strain (Yield, Compression Molded)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
32°F, Compression Molded
ft·lb/in²
  
73°F, Compression Molded
ft·lb/in²
  
ARM Impact - Total Penetration Energy 3 (32°F, 0.14 in)
ft·lb
 ARM
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: BorPlus™ SE525MO, BorPlus SE525MO, BorPlus™ , BorPlus, BorPlusSE525MO, SE 525 MO, SE525MO, SE525, 525MO, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Borealis, PolypropyleneUnspecified, PPUnspecified, 525SE
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Stiffness, Warp Resistant, Warpage Resistant, High Heat Resistance.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
2Compression Molded, 3.5 MPa, 2% Igepal
3Rotomolded specimen, 4.5 kg striker, 1 m height
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.