IDES Prospector Already have an account? Login Here

IDES

INEOS PP 100-GA35

Polypropylene Homopolymer

Supplied by INEOS Olefins & Polymers Europe

The technical datasheet with complete property values for INEOS PP 100-GA35 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
100-GA35 is a polypropylene homopolymer with a nominal MFR of 35 g/10min intended for injection-moulding, master-batches & compounds applications. Is is also suitable for extrusion coating applications in blend with LDPE.

Benefits and Features:
  • Very high flow rate
  • Controlled rheology - narrow molecular weight distribution
  • Good processability
  • Optimal product consistency
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Controlled Rheology
  • High Flow
  • Homopolymer
  • Narrow Molecular Weight Distribution
  
Uses 
  • Blending
  • Masterbatch
  
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Extrusion Coating
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Flexural Modulus (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/1A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Additional Information
Storage and Handling:
100-GA35 should be stored in dry conditions at temperatures below 50°C and protected from UV-light.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS PP 100-GA35, INEOS PP 100GA35, INEOS PP , INEOSPP100GA35, INEOSPP, PP 100 GA 35, PP 100, 100, PP100-GA35, PP100GA35, PP100:GA35, PP100/GA35, PP100+GA35, PP100_GA35, PP100 GA35, PP100, 100 GA 35, 100-GA35, 100GA35, 100:GA35, 100/GA35, 100+GA35, 100_GA35, 100 GA35, 100GA, GA35, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Ineos Polyolefins, PolypropyleneHomopolymer, PPHomopolymer, GA100, 100PP
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI, Narrow Molecular Weight Distribution, Narrow MW Distribution.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.