IDES Prospector Already have an account? Login Here

IDES

ECOVYLOPET® EMC2311

Polyethylene Terephthalate

Glass Fiber Reinforcement, 10%

Supplied by TOYOBO America, Inc.

The technical datasheet with complete property values for ECOVYLOPET® EMC2311 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Features
1. Having made significant improvement in appearances, fluidity and mold release easiness, ECOVYLOPET® can be processed much easier than general PET for injection molding.
2. It is adaptable for large auto-parts and industrial product parts.
3. With a specific miscibility method, its impact resistance has greatly been enhanced.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
Features 
  • Good Flow
  • Good Impact Resistance
  • Good Mold Release
  • Good Processability
  • Pleasing Surface Appearance
  • Recyclable Material
Uses 
  • Automotive Applications
  • Automotive Under the Hood
  • Bottles
  • Industrial Applications
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage
     ASTM D955
Flow: 0.0787 in
in/in
  
Across Flow: 0.0787 in
in/in
  
Water Absorption (73°F, 24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Strength (Yield)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
CLTE - Flow
in/in/°F
 ASTM D696
Additional Information
Nominal Value
Unit
Test Method
Flexibility Modulus
%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ECOVYLOPET® EMC2311, ECOVYLOPET EMC2311, ECOVYLOPET® , ECOVYLOPET, ECOVYLOPETEMC2311, EMC 2311, EMC2311, Polyethylene Terephthalate, PET, Polyester, Toyobo, PolyethyleneTerephthalate, 2311EMC
Features
Features may also be described by the following terms: Pleasing Surface Appearance, Good Flow, Good Impact Resistance, Good Mold Release, Easy Release, Good Demolding, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.