IDES Prospector Already have an account? Login Here

IDES

CYREX® 200-8000

Acrylonitrile Butadiene Styrene + PC

Supplied by Evonik CYRO LLC

The technical datasheet with complete property values for CYREX® 200-8000 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CYREX 200-8000 alloy is an opaque, acrylicpolycarbonate alloy with an impact strength that is higher than polycarbonate.

Typical properties of CYREX® acrylic-polycarbonate alloys are:
  • outstanding impact strength and toughness
  • excellent processing characteristics
  • very good chemical resistance
  • good heat resistance

The special property of CYREX 200-8000 alloy is:
  • medium melt flow rate

Used for injection molding and extrusion of both thin and thick wall applications which require excellent toughness.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Good Chemical Resistance
  • Good Processability
  • Good Toughness
  • High Impact Resistance
  • Medium Flow
  • Medium Heat Resistance
Uses 
  • Appliances
  • Automotive Applications
  • Containers
  • Furniture
  • Housings
  • Sheet
  • Thick-walled Parts
  • Thin-walled Parts
  • Toys
Agency Ratings 
Appearance 
  • Opaque
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Apparent Density
g/cm³
 ASTM D1895
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D551
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
32°F, 0.125 in
ft·lb/in
  
73°F, 0.125 in
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Annealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525
CLTE - Flow (32 to 212°F)
in/in/°F
 ASTM D696
Optical
Nominal Value
Unit
Test Method
Transmittance
 
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: CYREX® 200-8000, CYREX 2008000, CYREX® , CYREX, CYREX2008000, 200, 200-8000, 2008000, 200:8000, 200/8000, 200+8000, 200_8000, 200 8000, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Cyro, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 8000200
Features
Features may also be described by the following terms: Medium Flow, Medium Melt, Medium MFI, Good Processability, Easy Processing, Good Chemical Resistance, Chemical Resistant, Medium Heat Resistance, High Impact Resistance, Good Toughness, Tough.
Uses
Uses may also be described by the following terms: Housings, Housing, Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts, Automotive Applications, Automotive Sector, Thick-walled Parts, Thick Walled Parts, Thick-wall Parts, Thick Wall Parts, Thickwall Parts.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.