IDES Prospector Already have an account? Login Here

IDES

Marlex® PP AGM-010

Polypropylene Impact Copolymer

Supplied by Phillips Sumika Polypropylene Company

The technical datasheet with complete property values for Marlex® PP AGM-010 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Food Contact Acceptable
  • Impact Copolymer
  • Low Temperature Impact Resistance
Uses 
  • Blow Molding Applications
  • Non-specific Food Applications
  • Profiles
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Thermoforming
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183, ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238, ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
      
Yield, Injection Molded 2
psi
 ASTM D638
Yield, 0.126 in, Injection Molded
psi
 ISO 527-2/50
Flexural Modulus
      
Secant: Injection Molded 3
psi
 ASTM D790
Tangent: Injection Molded 4
psi
 ASTM D790
0.126 in, Injection Molded 5
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
      
-22°F, Injection Molded
ft·lb/in
 ASTM D256
32°F, Injection Molded
 
 ASTM D256
73°F, Injection Molded
 
 ASTM D256
-40°F, Injection Molded
ft·lb/in²
 ISO 180
73°F, Injection Molded
ft·lb/in²
 ISO 180
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness
      
R-Scale
 
 ASTM D785
R-Scale, 0.126 in
 
 ISO 2039-2
Durometer Hardness
      
Shore D, Injection Molded
 
 ASTM D2240
Shore D, 0.126 in, Injection Molded
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed, Injection Molded
°F
 ASTM D648
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed, Injection Molded
°F
 ASTM D648
264 psi, Unannealed
°F
 ISO 75-2/A
Additional Information
Nominal Value
Unit
Test Method
Blow Molding Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Marlex® PP AGM-010, Marlex PP AGM010, Marlex® PP , Marlex PP, MarlexPPAGM010, MarlexPP, AGM, PPAGM-010, PPAGM010, PPAGM:010, PPAGM/010, PPAGM+010, PPAGM_010, PPAGM 010, PPAGM, AGM-010, AGM010, AGM:010, AGM/010, AGM+010, AGM_010, AGM 010, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, PP, Phillips Sumika, PolypropyleneImpactCopolymer, PPImpactCopolymer, 010AGM, 010PPAGM
Features
Features may also be described by the following terms: Impact Copolymer, Low Temperatuer Impact Resistance, Low Temp Impact Resistance.
Uses
Uses may also be described by the following terms: Food Applications.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Injection
Nominal Value
Unit
 
Mold Temperature - Blow Molding
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
40.51 in/min
50.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.