IDES Prospector Already have an account? Login Here

IDES

Marlex® PP HHX-006

Polypropylene Homopolymer

Supplied by Phillips Sumika Polypropylene Company

The technical datasheet with complete property values for Marlex® PP HHX-006 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Color Stability
  • Good Heat Aging Resistance
  • Homopolymer
Uses 
  • Blow Molding Applications
  • Bottles
  • Tanks
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, Injection Molded)
psi
 ASTM D638
Flexural Modulus - Secant 3 (Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, Injection Molded)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale, Injection Molded)
 
 ASTM D785
Durometer Hardness (Shore D, Injection Molded)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, Injection Molded)
°F
 ASTM D648
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Marlex® PP HHX-006, Marlex PP HHX006, Marlex® PP , Marlex PP, MarlexPPHHX006, MarlexPP, HHX, PPHHX-006, PPHHX006, PPHHX:006, PPHHX/006, PPHHX+006, PPHHX_006, PPHHX 006, PPHHX, HHX-006, HHX006, HHX:006, HHX/006, HHX+006, HHX_006, HHX 006, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Phillips Sumika, PolypropyleneHomopolymer, PPHomopolymer, 006HHX, 006PPHHX
Features
Features may also be described by the following terms: Good Heat Aging Resistance, Good Color Stability.
Injection
Nominal Value
Unit
 
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Injection Notes
First stage injection pressure: Maximize
Screw speed: 30 to 60%
Packing pressure: Minimize
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.