IDES Prospector Already have an account? Login Here

IDES

Genestar™ G1350H

Polyamide 9T

Glass Fiber Reinforcement, 35%

Supplied by Kuraray America, Inc.

The technical datasheet with complete property values for Genestar™ G1350H is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 35% Filler by Weight
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
  
Melt Mass-Flow Rate (MFR) (320°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage
      
Flow: 0.0394 in
in/in
  
Across Flow: 0.0394 in
in/in
  
Water Absorption 2 (Saturation, 104°F)
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Glass Transition Temperature (DSC)
°F
  
Melting Temperature
°F
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength
V/mil
 ASTM D149
Relative Permittivity (10.0 GHz)
 
 ASTM D150
Dissipation Factor (10.0 GHz)
 
 ASTM D150
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
UL
Nominal Value
Unit
Test Method
Comparative Tracking Index (CTI) (PLC)
 
 UL 746
Additional Information
Nominal Value
Unit
Test Method
Bar Flow Length 3 (608°F, 19.7 mil)
in
  
Weld Elongation
%
 ASTM D638
Weld Strength
psi
 ASTM D638
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Genestar™ G1350H, Genestar G1350H, Genestar™ , Genestar, GenestarG1350H, G 1350 H, G1350H, G1350, 1350H, Polyamide 9T, Nylon 9T, Polyamide, Nylon, Kuraray, Polyamide9T, Nylon9T, 1350G
Generic Name
Generic Name may also be described by the following terms: PA9T.
Notes
1Typical properties: these are not to be construed as specifications.
290%RH, 96 hrs
3750 kgf
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.