IDES Prospector Already have an account? Login Here

IDES

ACRYLITE® MD™ H12

Polymethyl Methacrylate Acrylic

Supplied by Evonik CYRO LLC

The technical datasheet with complete property values for ACRYLITE® MD™ H12 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ACRYLITE® MD™ H12 acrylic polymer is an amorphous thermoplastic molding compound based on polymethyl methacrylate (PMMA) for the medical diagnostic industry.

Typical properties of ACRYLITE® MD™ acrylic polymers are:
-exceptional ultra-violet light transmittance (UVT)
-exceptional optical clarity
-good dimensional stability for controlled fluid flow

The special properties of ACRYLITE MD™ H12 polymer are:
-medium heat resistance
-medium melt flow rate
-UV light transmitting
-Lubricant free
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Amorphous
  • Good Dimensional Stability
  • Good UV Resistance
  • High Clarity
  • Medium Flow
  • Medium Heat Resistance
  • Opticals
Uses 
  • Medical/Healthcare Applications
  • Support Trays
  
Agency Ratings 
  •  1
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Apparent Density
g/cm³
 ASTM D1895
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus
psi
 ASTM D790
Flexural Strength (Yield)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.250 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Annealed, 0.00984 in)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525
CLTE - Flow (32 to 212°F)
in/in/°F
 ASTM D696
Optical
Nominal Value
Unit
Test Method
Transmittance
%
 ASTM D1003
Haze
%
 ASTM D1003
Yellowness Index
YI
 ASTM D1925
UV Transmittance (0.000013 in)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ACRYLITE® MD™ H12, ACRYLITE MD H12, ACRYLITE® MD™ , ACRYLITE MD, ACRYLITEMDH12, ACRYLITEMD, H 12, H12, Acrylic, Acrylic, Polymethyl Methacrylate, Acrylic Polymethyl Methacrylate, Acrylic (PMMA), Acrylic PMMA, pmma, Cyro, AcrylicPolymethylMethacrylate, AcrylicPMMA, 12H
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, High Clarity, Medium Heat Resistance, Medium Flow, Medium Melt, Medium MFI, Good Dimensional Stability, Dimensionally Stable.
Uses
Uses may also be described by the following terms: Medical Applications, Support Trays.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1), FDA (1), USP (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Colorless only
2Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.