|
Specific Gravity
|
|
|
ASTM D792 |
|
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
|
|
g/10 min
|
ASTM D1238 |
|
Film Thickness - Tested
|
|
mil
|
|
|
Film Thickness - Recommended / Available
|
|
|
|
|
Secant Modulus
|
|
|
ASTM D882 |
|
1% Secant, MD: 0.98 mil, Blown Film
|
|
psi
|
|
|
1% Secant, TD: 0.98 mil, Blown Film
|
|
psi
|
|
|
Tensile Strength
|
|
|
ASTM D882 |
|
MD: Yield, 0.98 mil, Blown Film
|
|
psi
|
|
|
TD: Yield, 0.98 mil, Blown Film
|
|
psi
|
|
|
MD: Break, 0.98 mil, Blown Film
|
|
psi
|
|
|
TD: Break, 0.98 mil, Blown Film
|
|
psi
|
|
|
Tensile Elongation
|
|
|
ASTM D882 |
|
MD: Break, 0.98 mil, Blown Film
|
|
%
|
|
|
TD: Break, 0.98 mil, Blown Film
|
|
%
|
|
|
Dart Drop Impact (0.98 mil, Blown Film)
|
|
g
|
ASTM D1709A |
|
Elmendorf Tear Strength
|
|
|
ASTM D1922 |
|
MD: 0.98 mil, Blown Film
|
|
g
|
|
|
TD: 0.98 mil, Blown Film
|
|
g
|
|
|
Seal Initiation Temperature 2 (0.98 mil, Blown Film)
|
|
°F
|
Internal Method |
|
Gloss (45°, 0.984 mil, Blown Film)
|
|
|
ASTM D2457 |
|
Haze (0.984 mil, Blown Film)
|
|
%
|
ASTM D1003 |
|
Low Friction Puncture - Blown Film (1.0 mil)
|
|
in·lb/mil
|
Internal Method |
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: SCLAIR® FPr017-D, SCLAIR FPr017D, SCLAIR® , SCLAIR, SCLAIRFPr017D, FPr 017, FPr 017 D, FPr017-D, FPr017D, FPr017:D, FPr017/D, FPr017+D, FPr017_D, FPr017 D, FPr017, 017D, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Nova Chemicals, PolyethyleneLinearLowDensity, 017FPr
|
|
Features may also be described by the following terms: Good Melt Strength, Good Toughness, Tough, Slip, Unspecified Slip, Good Tear Strength, Low Gel, Octene Comonomer, Good Processing Stability, Good Process Stability, Good Heat Seal, Good Processability, Easy Processing, Antiblocking, Unspecified Antiblock.
|
|
Uses may also be described by the following terms: Heavy-duty Bags, Heavy Duty Bags.
|
|
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (2).
|