IDES Prospector Already have an account? Login Here

IDES

Advanced Composites ADX-5007

Compounded Polypropylene

Talc Filler

Supplied by Advanced Composites, Inc.

The technical datasheet with complete property values for Advanced Composites ADX-5007 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Talc Filler
Features 
  • High Impact Resistance
  • Scratch Resistant
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow (0.118 in)
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Flexural Modulus
psi
 ASTM D790, ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-22°F
ft·lb/in
  
73°F
ft·lb/in
  
Instrumented Dart Impact 2 (-22°F, Totol Energy)
in·lb
 ASTM D3763
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Advanced Composites ADX-5007, Advanced Composites ADX5007, Advanced Composites , AdvancedCompositesADX5007, AdvancedComposites, ADX, CompositesADX-5007, CompositesADX5007, CompositesADX:5007, CompositesADX/5007, CompositesADX+5007, CompositesADX_5007, CompositesADX 5007, CompositesADX, ADX-5007, ADX5007, ADX:5007, ADX/5007, ADX+5007, ADX_5007, ADX 5007, Polypropylene, Compounded, Polypropylene Compounded, TPO, Polypropylene, PP, Adv Composites, PolypropyleneCompounded, 5007ADX, 5007CompositesADX
Features
Features may also be described by the following terms: Scratch Resistant, Resists Scratches, High Impact Resistance.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Cushion
in
  
Injection Notes
Injection Pressure: The preferred range is 50 to 60% of machine capacity
Notes
1Typical properties: these are not to be construed as specifications.
222.0 ft/sec
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.