IDES Prospector Already have an account? Login Here

IDES

ALTECH® PA66 A 2015/310 GF15 IM

Polyamide 66

Glass Fiber Reinforcement, 15%

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALTECH® PA66 A 2015/310 GF15 IM is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 15% Filler by Weight
Additive 
  • Impact Modifier
Features 
  • Impact Modified
Uses 
  • Engineering Parts
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B
Melting Temperature
°F
 ISO 11357-3
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® PA66 A 2015/310 GF15 IM, ALTECH PA66 A 2015310 GF15 IM, ALTECH® PA66 , ALTECH PA66, ALTECHPA66A2015310GF15IM, ALTECHPA66, PA 66 A 2015 310 GF 15 IM, PA 66 A 2015, A 2015, PA66A 2015/310 GF15 IM, PA66A 2015310 GF15 IM, PA66A 2015:310 GF15 IM, PA66A 2015+310 GF15 IM, PA66A 2015-310 GF15 IM, PA66A 2015_310 GF15 IM, PA66A 2015 310 GF15 IM, PA66, 66A, PA66A 2015, A 2015 310 GF 15 IM, PA66A2015310GF15IM, PA66A2015, A 2015/310 GF15 IM, A 2015310 GF15 IM, A 2015:310 GF15 IM, A 2015+310 GF15 IM, A 2015-310 GF15 IM, A 2015_310 GF15 IM, A 2015 310 GF15 IM, A2015, 2015310, 310GF, GF15, 15IM, PA66A2015_310GF15IM, A2015310GF15IM, A2015_310GF15IM, Polyamide 66, Nylon 66, Polyamide, Nylon, Albis Euro, Polyamide66, Nylon66, 2015A, 66PA
Generic Name
Generic Name may also be described by the following terms: PA66.
Uses
Uses may also be described by the following terms: Engineering Parts.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.