ALTECH PA66 A 2030/109 GF30 Albis Euro Polyamide 66 (Glass Fiber Reinforcement, 30%)

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Filler / Reinforcement

Glass Fiber Reinforcement, 30% Filler by Weight

Additive

Heat Stabilizer

Features

Good Flow

Good Mold Release

Heat Stabilized

Uses

Engineering Parts

Processing Method

Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Water Absorption				ISO 62
Saturation, 73°F		--	%
Equilibrium, 73°F, 50% RH		--	%
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus			psi	ISO 527-2
Tensile Stress (Break)			psi	ISO 527-2
Tensile Strain (Break)			%	ISO 527-2
Flexural Modulus		--	psi	ISO 178
Flexural Strength			psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (73°F)		--	ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)		--	ft·lb/in²	ISO 179/1eU
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		--	°F	ISO 75-2/B
264 psi, Unannealed		--	°F	ISO 75-2/A
Vicat Softening Temperature		--	°F	ISO 306/B
Melting Temperature		--	°F	ISO 11357-3
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity			ohms	IEC 60093
Volume Resistivity			ohm·cm	IEC 60093
Comparative Tracking Index (Solution A)		--	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL (0.0295 in)		--		UL 94
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® PA66 A 2030/109 GF30, ALTECH PA66 A 2030109 GF30, ALTECH® PA66 , ALTECH PA66, ALTECHPA66A2030109GF30, ALTECHPA66, PA 66 A 2030 109 GF 30, PA 66 A 2030, A 2030, PA66A 2030/109 GF30, PA66A 2030109 GF30, PA66A 2030:109 GF30, PA66A 2030+109 GF30, PA66A 2030-109 GF30, PA66A 2030_109 GF30, PA66A 2030 109 GF30, PA66, 66A, PA66A 2030, A 2030 109 GF 30, PA66A2030109GF30, PA66A2030, A 2030/109 GF30, A 2030109 GF30, A 2030:109 GF30, A 2030+109 GF30, A 2030-109 GF30, A 2030_109 GF30, A 2030 109 GF30, A2030, 2030109, 109GF, GF30, PA66A2030_109GF30, A2030109GF30, A2030_109GF30, Polyamide 66, Nylon 66, Polyamide, Nylon, Albis Euro, Polyamide66, Nylon66, 2030A, 66PA
Generic Name
Dry	Generic Name may also be described by the following terms: PA66.
Conditioned	Generic Name may also be described by the following terms: PA66.
Features
Dry	Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Flow, Good Mold Release, Easy Release, Good Demolding.
Uses
Dry	Uses may also be described by the following terms: Engineering Parts.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® PA66 A 2030/109 GF30, ALTECH PA66 A 2030109 GF30, ALTECH® PA66 , ALTECH PA66, ALTECHPA66A2030109GF30, ALTECHPA66, PA 66 A 2030 109 GF 30, PA 66 A 2030, A 2030, PA66A 2030/109 GF30, PA66A 2030109 GF30, PA66A 2030:109 GF30, PA66A 2030+109 GF30, PA66A 2030-109 GF30, PA66A 2030_109 GF30, PA66A 2030 109 GF30, PA66, 66A, PA66A 2030, A 2030 109 GF 30, PA66A2030109GF30, PA66A2030, A 2030/109 GF30, A 2030109 GF30, A 2030:109 GF30, A 2030+109 GF30, A 2030-109 GF30, A 2030_109 GF30, A 2030 109 GF30, A2030, 2030109, 109GF, GF30, PA66A2030_109GF30, A2030109GF30, A2030_109GF30, Polyamide 66, Nylon 66, Polyamide, Nylon, Albis Euro, Polyamide66, Nylon66, 2030A, 66PA

Injection	Dry	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

ALTECH® PA66 A 2030/109 GF30

Polyamide 66

Glass Fiber Reinforcement, 30%

Supplied by Albis Plastic GmbH