IDES Prospector Already have an account? Login Here

IDES

ALTECH® PA66/6 A 1000/567

Polyamide 66/6 Copolymer

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALTECH® PA66/6 A 1000/567 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Uses 
  • Cable Jacketing
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
 
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® PA66/6 A 1000/567, ALTECH PA666 A 1000567, ALTECH® PA66/6 , ALTECH PA666, ALTECH® PA66:6, ALTECH® PA66+6, ALTECH® PA66-6, ALTECH® PA66_6, ALTECH® PA66 6, ALTECHPA666A1000567, ALTECHPA666, ALTECH PA66_6, ALTECH PA66 6, PA 66 6 A 1000 567, PA 66 6 A 1000, ALTECHPA66_6, A 1000, PA66/6A 1000/567, PA666A 1000567, PA66:6A 1000:567, PA66+6A 1000+567, PA66-6A 1000-567, PA66_6A 1000_567, PA66 6A 1000 567, PA66, 666, 6A, PA66/6A 1000, PA666A 1000, PA66:6A 1000, PA66+6A 1000, PA66-6A 1000, PA66_6A 1000, PA66 6A 1000, PA666A1000567, PA666A1000, A 1000/567, A 1000567, A 1000:567, A 1000+567, A 1000-567, A 1000_567, A 1000 567, A1000, 1000567, PA66_6A1000_567, PA66_6A1000, A1000567, A1000_567, Polyamide 66/6 Copolymer, Polyamide 666 Copolymer, Polyamide 66:6 Copolymer, Polyamide 66+6 Copolymer, Polyamide 66-6 Copolymer, Polyamide 66_6 Copolymer, Polyamide 66 6 Copolymer, Nylon 66/6, Nylon 666, Nylon 66:6, Nylon 66+6, Nylon 66-6, Nylon 66_6, Nylon 66 6, Polyamide, Nylon, pa666, Albis Euro, Polyamide666Copolymer, Nylon666, Polyamide66_6Copolymer, Nylon66_6, 1000A, 66PA
Generic Name
Generic Name may also be described by the following terms: PA666, PA66/6.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.