Celstran +PP-GF30-04CN02/10 Ticona Polypropylene, Unspecified (Long Glass Fiber, 30%)

Product Description

Material code according to ISO 1043-1: PP

Polypropylene with 30 weight percent ash content, long
glass fibers reinforced. The fibers are chemically coupled to the polypropylene
matrix. The pellets are cylindrical and normally as well as the
embedded fibers 10 mm long.

Parts molded of CELSTRAN have outstanding mechanical properties such
as high strength and stiffness combined with high heat deflection.
The notched impact strength is increased at elevated and low
temperatures due to the fiber skeleton built in the parts. The long
fiber reinforcement reduces creep significantly.

The very isotropic shrinkage in the molded parts minimizes the
warpage.

Complex parts can be manufactured with high reproducibility by
injection molding.

Application field: Functionial/structural parts for automotive

General

Material Status

Commercial: Active

Availability

North America

Filler / Reinforcement

Long Glass Fiber, 30% Filler by Weight

Additive

Heat Stabilizer

Features

Chemically Coupled

Good Creep Resistance

Good Impact Resistance

Heat Stabilized

High Stiffness

High Strength

Low Temperature Impact Resistance

Low Warpage

Uses

Automotive Applications

RoHS Compliance

Forms

Pellets

Processing Method

Injection Molding

Sheet Extrusion

Resin ID (ISO 1043)

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
--		psi	ISO 527-2/1A/1
176°F		psi	ISO 527-2
Tensile Stress (Break)		psi	ISO 527-2/1A/5
Tensile Strain
Break		%	ISO 527-2/1A/5
Break, 176°F		%	ISO 527-2
Flexural Modulus (73°F)		psi	ISO 178
Flexural Strength (73°F)		psi	ISO 178
Tensile Strength (176°F)		psi	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F		ft·lb/in²
73°F		ft·lb/in²
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
264 psi, Unannealed		°F	ISO 75-2/A
1160 psi, Unannealed		°F	ISO 75-2/C
Melting Temperature²		°F	ISO 11357-3
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Celstran® +PP-GF30-04CN02/10, Celstran PPGF3004CN0210, Celstran® , Celstran, CelstranPPGF3004CN0210, PP GF 30 04 CN 02 10, +PP-GF30-04CN02/10, PPGF3004CN0210, +PP-GF30-04CN02:10, +PP-GF30-04CN02+10, +PP-GF30-04CN02-10, +PP-GF30-04CN02_10, +PP-GF30-04CN02 10, :PP-GF30-04CN02/10, /PP-GF30-04CN02/10, -PP-GF30-04CN02/10, _PP-GF30-04CN02/10, PP-GF30-04CN02/10, PP-GF30-04CN02/10, PP GF30 04CN02 10, +PP:GF30:04CN02/10, +PP/GF30/04CN02/10, +PP+GF30+04CN02/10, +PP_GF30_04CN02/10, +PP GF30 04CN02/10, PPGF, GF30, 3004, 04CN, CN02, 0210, PPGF3004CN02_10, PPGF3004CN02 10, _PPGF3004CN0210, PP_GF30_04CN0210, PP GF30 04CN0210, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Ticona, PolypropyleneUnspecified, PPUnspecified, GFPP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Impact Resistance, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, High Strength, Low Warpage, Low Warp, High Stiffness, Good Creep Resistance, Creep Resistant, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Notes
Celstran can be processed on a standard injection molding unit. A general purpose metering screw is recommended with a zone distribution of 40% feed, 40% transition, and 20% metering. A free flowing check ring assembly is recommended.

Notes

¹Typical properties: these are not to be construed as specifications.

²10°C/min

Celstran® +PP-GF30-04CN02/10

Polypropylene

Long Glass Fiber, 30%

Supplied by Ticona