Versollan OM 1262NX-9 GLS Thermoplastic Elastomer

Product Description

Versollan™ OM 1262NX-9 is a performance TPU alloy designed for thin-wall overmolding onto polycarbonate (PC), ABS, PC/ABS and copolyester substrates.

Excellent Grip with Matte, Rubbery Finish

Proven Track Record

Superior Adhesion to PC, ABS, PC/ABS, PC/PBT and Copolyester

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

North America

South America

Features

Good Moldability

Good Processability

Low Gloss

Uses

Business Equipment

Consumer Applications

Electrical/Electronic Applications

Flexible Grips

Overmolding

Power/Other Tools

Thin-walled Parts

Agency Ratings

RoHS Compliance

Appearance

Black

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR)			ASTM D1238
190°C/2.16 kg		g/10 min
200°C/5.0 kg		g/10 min
Molding Shrinkage - Flow		in/in	ASTM D955
Elastomers	Nominal Value	Unit	Test Method
Tensile Stress^2, 3			ASTM D412
100% Strain, 73°F		psi
300% Strain, 73°F		psi
Tensile Strength^2, 3 (Break, 73°F)		psi	ASTM D412
Tensile Elongation^2, 3 (Break, 73°F)		%	ASTM D412
Tear Strength		lbf/in	ASTM D624
Compression Set (73°F, 22.0 hr)		%	ASTM D395B
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 10 sec)			ASTM D2240
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0591 in)			UL 94
Fill Analysis	Nominal Value	Unit	Test Method
Apparent Viscosity (392°F, 11200 sec^-1)		Pa·s	ASTM D3835
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Versollan™ OM 1262NX-9, Versollan OM 1262NX9, Versollan™ , Versollan, VersollanOM1262NX9, OM 1262 NX, OM 1262NX, OM 1262 NX 9, OM1262NX, OM 1262NX-9, OM 1262NX9, OM 1262NX:9, OM 1262NX/9, OM 1262NX+9, OM 1262NX_9, OM 1262NX 9, OM1262, 1262NX, NX9, OM1262NX9, OM1262NX_9, Thermoplastic Elastomer, TPE, GLS, ThermoplasticElastomer, 1262OM
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good Moldability, Low Gloss.
Uses
Uses may also be described by the following terms: Business Equipment, Business Machines, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Flexible Grips, Power Tools, Tools, Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): UL (1).

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Suggested Max Regrind		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Mold Temperature		°F
Back Pressure		psi
Screw Speed		rpm
Injection Notes
Purge thoroughly before and after use of this product with a low flow (0.5 - 2.5 MFR) polyethylene (PE) or polypropylene (PP). Regrind levels up to 20% can be used with Versollan™ OM 1262NX-9 with minimal property loss, provided that the regrind is free of contamination. To minimize losses during molding, the melt temperature should remain as low as possible. The final determination of regrind effectiveness should be determined by the customer. Versollan™ OM 1262NX-9 should not be left in the barrel for extended idle periods (greater than 5 minutes). Suggested Dewpoint: -40°F Injection Speed: 1 to 5 in/sec 1st Stage - Boost Pressure: 200 to 800 psi 2nd Stage - Hold Pressure: 70% of Boost Hold Time (Thick Part): 4 to 10 sec Hold Time (Thin Part): 1 to 3 sec

Notes

¹Typical properties: these are not to be construed as specifications.

²Die C

³2 hr

Versollan™ OM 1262NX-9

Thermoplastic Elastomer

Supplied by GLS Thermoplastic Elastomers