IDES Prospector Already have an account? Login Here

IDES

Chemiton GTB5FA 80E

Styrene Ethylene Butylene Styrene Block Copolymer

Supplied by Franplast S.r.l.

The technical datasheet with complete property values for Chemiton GTB5FA 80E is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SBS/SEBS compounds, with or without foaming agent, food contact approved. Injection molding and extrusion grades available. Properties and performances similar corks.

Application:
  • Bottle Stoppers (Food)
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Food Contact Acceptable
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Break)
psi
 ISO 527-2
Nominal Tensile Strain at Break
%
 ISO 527-2
Elastomers
Nominal Value
Unit
Test Method
Tear Strength
lbf/in
 ISO 34-1
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore A)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Service Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Chemiton GTB5FA 80E, Chemiton , ChemitonGTB5FA80E, GTB 5 FA 80 E, GTB5FA 80E, GTB5, 5FA, FA80, 80E, GTB5FA80E, Styrene Ethylene Butylene Styrene Block Copolymer, SEBS, Thermoplastic Elastomer, TPE, Franplast, StyreneEthyleneButyleneStyreneBlockCopolymer, ThermoplasticElastomer, 5GTB
Injection
Nominal Value
Unit
 
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.