IDES Prospector Already have an account? Login Here

IDES

REPOL® H026SG

Polypropylene Homopolymer

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for REPOL® H026SG is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
REPOL Polypropylene H026SG is manufactured using Unipol PP process which combines the production efficiency of gas phase fluidized bed reactor technology with the high activity stereospecific catalyst system.

Repol H026SG is recommended for Raffia Tapes used in making fabrics for big bags / FIBCs, geotextiles, carpet backing and ropes.

Repol H026SG combines good processability on water bath and chill-roll with excellent mechanical properties. Formulated for low water carry-over.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • Good Processability
  • Homopolymer
  • Low Water Carryover
  
Uses 
  • Bags
  • Carpet Backing
  • Rope
  • Tape
  
Agency Ratings 
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, Injection Molded)
psi
 ASTM D638
Tensile Elongation 2 (Yield, Injection Molded)
%
 ASTM D638
Flexural Modulus - 1% Secant (Injection Molded)
psi
 ASTM D790A
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, Injection Molded)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Peak Melting Temperature 3
°F
 ASTM D3418
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: REPOL® H026SG, REPOL H026SG, REPOL® , REPOL, REPOLH026SG, H 026 SG, H026SG, H026, 026SG, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Reliance, PolypropyleneHomopolymer, PPHomopolymer, 026H
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Low Water Carryover.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 2.0 in/min
3Second Heating
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.