IDES Prospector Already have an account? Login Here

IDES

GELOY* EXGY30CP Resin

Acrylonitrile Styrene Acrylate

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for GELOY* EXGY30CP Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Pearlescent GELOY ASA resin with copper-look for capstock extrusion. Outstanding weatherability.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Weather Resistance
Uses 
  • Capstock
Appearance 
  • Pearlescent
Processing Method 
  • Sheet Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (200°C/3.8 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow (0.126 in)
in/in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 2
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength
      
Yield 3
psi
 ASTM D638
Yield
psi
 ISO 527-2/5
Break 3
psi
 ASTM D638
Break
psi
 ISO 527-2/5
Tensile Elongation
      
Yield 3
%
 ASTM D638
Yield
%
 ISO 527-2/5
Break 3
%
 ASTM D638
Break
%
 ISO 527-2/5
Flexural Modulus
      
1.97 in Span 4
psi
 ASTM D790
-- 5
psi
 ISO 178
Flexural Strength
      
-- 5, 6
psi
 ISO 178
Yield, 1.97 in Span 4
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
      
-22°F
ft·lb/in
 ASTM D256
73°F
ft·lb/in
 ASTM D256
-22°F 7
ft·lb/in²
 ISO 180/1A
73°F 7
ft·lb/in²
 ISO 180/1A
Instrumented Dart Impact (73°F, Total Energy)
in·lb
 ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
264 psi, Unannealed, 0.126 in
°F
 ASTM D648
264 psi, Unannealed, 2.52 in Span 8
°F
 ISO 75-2/Af
Vicat Softening Temperature
      
--
°F
 ASTM D1525 9
--
°F
 ISO 306/B50
CLTE
     ISO 11359-2
Flow: -40 to 104°F
in/in/°F
  
Transverse: -40 to 104°F
in/in/°F
  
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: GELOY* EXGY30CP Resin, GELOY EXGY30CP Resin, GELOY* , GELOY, GELOYEXGY30CPResin, EXGY 30 CP Resin, EXGY30CP Resin, EXGY30, 30CP, CPResin, EXGY30CPResin, Acrylonitrile Styrene Acrylate, ASA, SABIC IP, AcrylonitrileStyreneAcrylate, 30EXGY
Features
Features may also be described by the following terms: Good Weather Resistance, Weather Resistant.
Uses
Uses may also be described by the following terms: Capstock, Architectural Capping, Capping Resin.
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Drying Time (Cumulative): 12 hrs
Minimum Moisture Content: 0.04 %
Roll Stack Temp - Bottom: 66 - 88 °C
Roll Stack Temp - Middle: 71 - 93 °C
Roll Stack Temp - Top: 71 - 99 °C
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
3Type I, 0.20 in/min
40.051 in/min
50.079 in/min
6Yield
780*10*4
880*10*4 mm
9Rate B (120°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.