IDES Prospector Already have an account? Login Here

IDES

Halene H M5002L

High Density Polyethylene

Supplied by Haldia Petrochemicals Ltd.

The technical datasheet with complete property values for Halene H M5002L is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
M5002L is a Narrow MWD HDPE produced by the Spherilene Technology.

M5002L is suited for injection molding of Caps and Closure application.

The precise control of morphology & MWD during polymerization confers superior processability and improved performance properties compared to conventional HDPE grades.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Good Processability
  • Narrow Molecular Weight Distribution
  
Uses 
  • Caps
  • Closures
  
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2
     ASTM D638
Yield, Injection Molded
psi
  
Break, Injection Molded
psi
  
Tensile Elongation 2 (Break, Injection Molded)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 3
Melting Temperature
°F
 ASTM D3418
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Halene H M5002L, Halene H , HaleneHM5002L, HaleneH, HM 5002 L, HM5002L, HM5002, M 5002 L, M5002L, M5002, 5002L, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Haldia Petrochem, PolyethyleneHighDensity, 5002M, 5002HM
Features
Features may also be described by the following terms: Narrow Molecular Weight Distribution, Narrow MW Distribution, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap.
Notes
1Typical properties: these are not to be construed as specifications.
2Type IV
3Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.