IDES Prospector Already have an account? Login Here

IDES

Slique™ 1850W61 Bk-1

Polyamide 6

Glass Fiber Reinforcement, 40%

Supplied by Technical Polymers, LLC

The technical datasheet with complete property values for Slique™ 1850W61 Bk-1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PA6, 40% Glass Reinforced, Friction/Wear Modified, Black
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 40% Filler by Weight
Additive 
  • Lubricant
Features 
  • Good Wear Resistance
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 73°F)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (Yield, 73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
      
73°F
ft·lb/in
 ASTM D256
73°F
ft·lb/in²
 ISO 180
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Melting Temperature
°F
 ASTM D3418
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Slique™ 1850W61 Bk-1, Slique 1850W61 Bk1, Slique™ , Slique, Slique1850W61Bk1, 1850 W 61 Bk, 1850W61 Bk, 1850 W 61 Bk 1, 1850W61Bk, 1850W61 Bk-1, 1850W61 Bk1, 1850W61 Bk:1, 1850W61 Bk/1, 1850W61 Bk+1, 1850W61 Bk_1, 1850W61 Bk 1, 1850W, W61, 61Bk, Bk1, 1850W61Bk1, 1850W61Bk_1, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Technical Polymers, Polyamide6, Nylon6, W1850
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Good Wear Resistance, Wear Resistant.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Notes
Can be over-dried. Do not exceed 180 - 200 F for more than 3 hours. Typical drying time assumes unopened packaging and utilization of a dehumidifying dryer with a dewpoint of -40° and appropriate airflow.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.