IDES Prospector Already have an account? Login Here

IDES

Quattor EVA UE-2015/32

Ethylene Vinyl Acetate Copolymer

Supplied by Quattor Petroquímica

The technical datasheet with complete property values for Quattor EVA UE-2015/32 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Ethylene Vinyl Acetate Copolymer produced under high pressure conditions in an autoclave reactor. With high vinyl-acetate content, it offers excellent compatibility with other thermoplastics and inorganic fillers as well as high stress cracking resistance, resilience at low temperatures and excellent elasticity and flexibility.

This resin is recommended to produce hot melt adhesives. Also it is good for injection molding and coating hot melt processes.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
  • South America
  
Features 
  • Food Contact Acceptable
  • Good Flexibility
  • High ESCR (Stress Crack Resist.)
  • Resilient
  
Uses 
  • Adhesives
Agency Ratings 
Processing Method 
  • Coating
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (125°C/0.325 kg)
g/10 min
 ASTM D1238
Vinyl Acetate Content
wt%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation (Break)
%
 ASTM D638
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240
Shore A
 
  
Shore D
 
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525 2
Melting Temperature
°F
 ASTM D3418
Additional Information
Specimen: According to ASTM-D 4703, annex 1 procedure C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Quattor EVA UE-2015/32, Quattor EVA UE201532, Quattor EVA , QuattorEVAUE201532, QuattorEVA, EVAUE 2015 32, UE, EVAUE-2015/32, EVAUE201532, EVAUE-2015:32, EVAUE-2015+32, EVAUE-2015-32, EVAUE-2015_32, EVAUE-2015 32, EVAUE:2015/32, EVAUE/2015/32, EVAUE+2015/32, EVAUE_2015/32, EVAUE 2015/32, EVAUE2015, EVAUE, UE 2015 32, EVAUE2015_32, EVAUE2015 32, EVAUE_201532, EVAUE 201532, UE-2015/32, UE201532, UE-2015:32, UE-2015+32, UE-2015-32, UE-2015_32, UE-2015 32, UE:2015/32, UE/2015/32, UE+2015/32, UE_2015/32, UE 2015/32, UE2015, 201532, UE2015_32, UE2015 32, UE_201532, UE 201532, Ethylene Vinyl Acetate Copolymer, EVA, Polyethylene, PE, Quattor Petroquimica, EthyleneVinylAcetateCopolymer, 2015UE, 2015EVAUE
Features
Features may also be described by the following terms: High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Flexibility, Flexible.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ANVISA (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Rate B (120°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.