IDES Prospector Already have an account? Login Here

IDES

Quattor® ATH-38044

Linear Medium Density Polyethylene

Supplied by Quattor Petroquímica

The technical datasheet with complete property values for Quattor® ATH-38044 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Quattor® ATH-38044 (experimental grade) is a linear medium density polyethylene, hexene copolymer, produced through Unipol® process and recommended for cast film extrusion blended with low density polyethylene (LDPE). This resin was draw to achieve outstanding outputting (lower necking) at higher speed extruders.
Films produced using Quattor® ATH-38044 have excellent optical properties and good balance stiffness/softness on final product.

Applications: back sheet for diapers.
General  
Material Status 
  • Experimental: Active
Availability 
  • North America
  • South America
  
Features 
  • Hexene Comonomer
  • Opticals
  
Uses 
  • Cast Film
Processing Method 
  • Cast Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Quattor® ATH-38044, Quattor ATH38044, Quattor® , Quattor, QuattorATH38044, ATH, ATH-38044, ATH38044, ATH:38044, ATH/38044, ATH+38044, ATH_38044, ATH 38044, Polyethylene, Linear Medium Density, Polyethylene Linear Medium Density, LMDPE, Polyethylene, PE, Quattor Petroquimica, PolyethyleneLinearMediumDensity, 38044ATH
Features
Features may also be described by the following terms: Hexene Comonomer.
Uses
Uses may also be described by the following terms: Cast Film.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.