IDES Prospector Already have an account? Login Here

IDES

Quattor® EI-60070

High Density Polyethylene

Supplied by Quattor Petroquímica

The technical datasheet with complete property values for Quattor® EI-60070 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
QUATTOR® EI-60070 is a homopolymer high-density polyethylene, produced through Unipol® process and recommended for use in injection molding.
Injected parts obtained using QUATTOR® EI-60070 exhibit high rigidity, outstanding impact resistance and good dimensional stability.

Applications: toys, housewares, bins, toilet seats.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
  • South America
  
Features 
  • Food Contact Acceptable
  • Good Dimensional Stability
  • Good Impact Resistance
  • High Rigidity
  • Homopolymer
Uses 
  • Household Goods
  • Toys
  
Agency Ratings 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (122°F, 10% Igepal, F50)
hr
 ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Yield)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Unnotched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Quattor® EI-60070, Quattor EI60070, Quattor® , Quattor, QuattorEI60070, EI, EI-60070, EI60070, EI:60070, EI/60070, EI+60070, EI_60070, EI 60070, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Quattor Petroquimica, PolyethyleneHighDensity, 60070EI
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, Good Impact Resistance, High Rigidity.
Uses
Uses may also be described by the following terms: Household Goods, Housewares.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ANVISA (1).
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.