IDES Prospector Already have an account? Login Here

IDES

Quattor® HF-20007

Linear Low Density Polyethylene

Supplied by Quattor Petroquímica

The technical datasheet with complete property values for Quattor® HF-20007 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Quattor® HF-20007 is a linear low density polyethylene, hexene copolymer, produced through Unipol® process and recommended for blown film extrusion blended with low density polyethylene (LDPE).
Films produced using Quattor® HF-20007 have high impact and puncture resistance, high coefficient of friction (COF) and high weld rupture resistance.

Applications: general use film with high COF and blocking, stretch film.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
  • South America
  
Features 
  • Hexene Comonomer
  • High Friction
  • High Impact Resistance
Uses 
  • Film
  • Stretch Wrap
  
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Strength
     ASTM D882
MD: Yield, 0.98 mil, Blown Film
psi
  
TD: Yield, 0.98 mil, Blown Film
psi
  
MD: Break, 0.98 mil, Blown Film
psi
  
TD: Break, 0.98 mil, Blown Film
psi
  
Tensile Elongation
     ASTM D882
MD: Yield, 0.98 mil, Blown Film
%
  
TD: Yield, 0.98 mil, Blown Film
%
  
MD: Break, 0.98 mil, Blown Film
%
  
TD: Break, 0.98 mil, Blown Film
%
  
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 5.12 mil, Blown Film)
 
 ASTM D2457
Haze (5.12 mil, Blown Film)
%
 ASTM D1003
Additional Information
Film data obtained on 25 µm thickness film produced on a 70 mm extruder, blow up ratio 2.2:1, die gap 1.8 mm, and 120 kg/h output
Optical data obtained on 130 µm thickness film produced on a 70 mm extruder, blow up ratio 2.2:1, die gap 1.8 mm, and 150 kg/h output
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Quattor® HF-20007, Quattor HF20007, Quattor® , Quattor, QuattorHF20007, HF, HF-20007, HF20007, HF:20007, HF/20007, HF+20007, HF_20007, HF 20007, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Quattor Petroquimica, PolyethyleneLinearLowDensity, 20007HF
Features
Features may also be described by the following terms: Hexene Comonomer, High Friction, High Impact Resistance.
Uses
Uses may also be described by the following terms: Stretch Wrap.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.