IDES Prospector Already have an account? Login Here

IDES

Quattor® MF-28006

Linear Low Density Polyethylene

Supplied by Quattor Petroquímica

The technical datasheet with complete property values for Quattor® MF-28006 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Quattor® MF-28006 is a metallocene linear low density polyethylene (mLLDPE), produced through Unipol® process and recommended for blown film extrusion blended with up to 20% LDPE. It can be processed at LDPE or LLDPE extruders and due to its higher density no HDPE is needed in shrink films formulations.
Films produced using Quattor® MF-28006 exhibit superior mechanical performance, better sealing properties, higher clarity and comparable shrinkage levels in comparison to LDPE rich blends.

Applications: automatic packaging for liquid and solid, frozen food packaging, lamination and coextrusion.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
  • South America
  
Additive 
  • Processing Aid
  • Slip
  
Features 
  • High Clarity
  • Slip
  
Uses 
  • Film
  • Food Packaging
  • Laminates
  • Packaging
  
Processing Method 
  • Blown Film
  • Coextrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Shrinkage
     Internal Method
MD: 302°F
%
  
TD: 302°F
%
  
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (vs. Itself - Dynamic, Blown Film)
 
 ASTM D1894
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
1% Secant, MD: 0.98 mil, Blown Film
psi
  
1% Secant, TD: 0.98 mil, Blown Film
psi
  
Tensile Strength
     ASTM D882
MD: Yield, 0.98 mil, Blown Film
psi
  
TD: Yield, 0.98 mil, Blown Film
psi
  
MD: Break, 0.98 mil, Blown Film
psi
  
TD: Break, 0.98 mil, Blown Film
psi
  
Tensile Elongation
     ASTM D882
MD: Yield, 0.98 mil, Blown Film
%
  
TD: Yield, 0.98 mil, Blown Film
%
  
MD: Break, 0.98 mil, Blown Film
%
  
TD: Break, 0.98 mil, Blown Film
%
  
Dart Drop Impact (0.98 mil, Blown Film)
g
 ASTM D1709A
Elmendorf Tear Strength
     ASTM D1922
MD: 0.98 mil, Blown Film
g
  
TD: 0.98 mil, Blown Film
g
  
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
 
 ASTM D2457
Transmittance
%
 ASTM D1003
Haze
%
 ASTM D1003
Additional Information
Film data obtained on 25 µm thickness film produced on a 75 mm extruder, blow up ratio 2.2:1, die gap 1.0 mm, and 165 kg/h output
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Quattor® MF-28006, Quattor MF28006, Quattor® , Quattor, QuattorMF28006, MF, MF-28006, MF28006, MF:28006, MF/28006, MF+28006, MF_28006, MF 28006, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Quattor Petroquimica, PolyethyleneLinearLowDensity, 28006MF
Features
Features may also be described by the following terms: High Clarity, Slip, Unspecified Slip.
Uses
Uses may also be described by the following terms: Food Packaging.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Extrusion Notes
Blow-up Ratio: 2.0 to 3.0:1
Die Gap: 1.0 mm
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.