IDES Prospector Already have an account? Login Here

IDES

Quattor PP LUZZ®130

Polypropylene Random Copolymer

Supplied by Quattor Petroquímica

The technical datasheet with complete property values for Quattor PP LUZZ®130 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LUZZ®130 is a random copolymer of low flow, with excellent balance of mechanical properties and high transparency for the wall thicknesses of up to 2.0 mm.

PROCESS AND TYPICAL APPLICATIONS: Extrusion-Blowing molding of bottles, bottles, Home Utilities and so on High-transparency. Extrusion of molding plates, profiles, pipes, etc. with high transparency.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
  • South America
  
Features 
  • High Clarity
  • Low Flow
  • Random Copolymer
Uses 
  • Bottles
  • Piping
  • Profiles
Appearance 
  • Clear/Transparent
Processing Method 
  • Extrusion
  • Extrusion Blow Molding
  • Pipe Extrusion
  • Profile Extrusion
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Yield)
%
 ASTM D638
Flexural Modulus 3
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, 1 sec)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525 4
Optical
Nominal Value
Unit
Test Method
Haze
     ASTM D1003
59.1 mil
%
  
118 mil
%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Quattor PP LUZZ®130, Quattor PP LUZZ130, Quattor PP , QuattorPPLUZZ130, QuattorPP, PPLUZZ 130, PPLUZZ®130, PPLUZZ130, PP, LUZZ 130, LUZZ®130, LUZZ130, Polypropylene Random Copolymer, PP Random Copolymer, Polypropylene, Quattor Petroquimica, PolypropyleneRandomCopolymer, PPRandomCopolymer, 130LUZZ, 130PPLUZZ
Features
Features may also be described by the following terms: High Clarity, Random Copolymer, Low Flow, Low Melt, Low MFI.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
4Rate A (50°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.