IDES Prospector Already have an account? Login Here

IDES

Hytrel® HTR8163HVBK

THERMOPLASTIC POLYESTER ELASTOMER

Supplied by DuPont Performance Polymers

The technical datasheet with complete property values for Hytrel® HTR8163HVBK is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Hytrel® HTR8163HVBK is a 65 nom. Shore D, heat stabilised, plasticiser free high performance resin for extrusion; low temperature impact, excellent heat ageing, fatigue and crack propagation resistance; for air break tubes.
General  
Material Status 
  • Preliminary Data 1
Availability 
  • Asia Pacific
  • Europe
  • North America
RoHS Compliance 
Appearance 
  • Black
Processing Method 
  • Extrusion
Part Marking Code (ISO 11469)
  • >TPC-ET<
Resin ID (ISO 1043)
  • TPC-ET
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
ISO 527-2
Tensile Stress
    ISO 527-2/1BA
Break, 73°F
psi
 
50% Strain, 73°F
psi
 
Tensile Stress - 10% Strain (73°F)
psi
ISO 527-2/1BA
Tensile Strain (Break, 73°F)
%
ISO 527-2/1BA
Flexural Modulus (73°F)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
    ISO 180/1A
-58°F, Partial Break
ft·lb/in²
 
32°F
 
 
73°F
 
 
Hardness
Nominal Value
Unit
Test Method
Shore Hardness
    ISO 868
Shore D
 
 
Shore D, 15 sec
 
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
ISO 75-2/B
Brittleness Temperature
     
--
°F
ASTM D746
--
°F
ISO 974
Melting Temperature 3
°F
ISO 11357-3
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Hytrel® HTR8163HVBK, Hytrel HTR8163HVBK, Hytrel® , Hytrel, HytrelHTR8163HVBK, HTR 8163 HVBK, HTR8163HVBK, HTR8163, 8163HVBK, Thermoplastic Copolyester Elastomer, TPC-ET, TPCET, TPC:ET, TPC/ET, TPC+ET, TPC_ET, TPC ET, Thermoplastic Elastomer, TPE, DuPont, ThermoplasticCopolyesterElastomer, ThermoplasticElastomer, 8163HTR
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Melt Temperature, Optimum - Injection Molding
°F
 
Mold Temperature
°F
 
Mold Temperature, Optimum - Injection Molding
°F
 
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Extrusion Melt Temperature, Optimum
°F
 
Notes
1The above data are preliminary and are subject to change as additional data are developed on subsequent lots.
2Typical properties: these are not to be construed as specifications.
310°C/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.