IDES Prospector Already have an account? Login Here

IDES

Tarflon® AZ1900T

Polycarbonate

Supplied by Idemitsu Chemicals

The technical datasheet with complete property values for Tarflon® AZ1900T is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Flame retardant material for highest requirements with excellent transparency and high flowability. Also available in transparent colours. Recycling at 100 % use up to three times without loss of mechanical performance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Flame Retardant
  • High Flow
  • Recyclable Material
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)
g/10 min
 ISO 1133
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (73°F, 24 hr)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress
     ISO 527-2
Yield
psi
  
Break
psi
  
Nominal Tensile Strain at Break
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Taber Abrasion Resistance (1000 Cycles)
mg
 ASTM D1044
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness
     ISO 2039-2
M-Scale
 
  
R-Scale
 
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
CLTE - Flow
in/in/°F
 ASTM D696
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250
60 Hz
 
  
1 MHz
 
  
Arc Resistance
sec
 ASTM D495
Electric Strength (0.0630 in)
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in)
 
 UL 94
Glow Wire Flammability Index
     IEC 60695-2-12
0.0630 in
°F
  
0.0787 in
°F
  
0.118 in
°F
  
Oxygen Index
%
 ASTM D2863
UL File Number
 
  
UL
Nominal Value
Unit
Test Method
Hot-wire Ignition (HWI) (PLC) (0.0579 in)
 
 UL 746
Optical
Nominal Value
Unit
Test Method
Refractive Index 2
 
  
Transmittance
%
 ISO 13468
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Tarflon® AZ1900T , Tarflon AZ1900T, Tarflon® , Tarflon, TarflonAZ1900T, AZ 1900 T, AZ1900T, AZ1900, 1900T, Polycarbonate, PC, Idemitsu, 1900AZ
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2nD25
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.