IDES Prospector Already have an account? Login Here

IDES

NORYL GTX* GTX8110 Resin

Polyphenylene Ether + PS + Nylon

Glass Fiber Reinforcement

Supplied by SABIC Innovative Plastics Europe

The technical datasheet with complete property values for NORYL GTX* GTX8110 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
GTX8110 is a glass filled extrudable Noryl GTX with low thermal conductivity, suitable for thermal breaks
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement
Features 
  • Thermally Insulating
RoHS Compliance 
Processing Method 
  • Profile Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (280°C/10.0 kg)
in³/10min
 ISO 1133
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress
     ISO 527-2/5
Yield
psi
  
Break
psi
  
Tensile Strain
     ISO 527-2/5
Yield
%
  
Break
%
  
Flexural Modulus 2
psi
 ISO 178
Flexural Strength 2, 3
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 4 (73°F)
ft·lb/in²
 ISO 179/1eA
Notched Izod Impact Strength 5
     ISO 180/1A
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 6 (66 psi, Unannealed, 2.52 in Span)
°F
 ISO 75-2/Bf
Vicat Softening Temperature
°F
 ISO 306/B50, ISO 306/B120
CLTE
     ISO 11359-2
Flow: 73 to 140°F
in/in/°F
  
Transverse: 73 to 140°F
in/in/°F
  
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: NORYL GTX* GTX8110 Resin, NORYL GTX GTX8110 Resin, NORYL GTX* , NORYL GTX, NORYLGTXGTX8110Resin, NORYLGTX, GTX 8110 Resin, GTX8110 Resin, GTX8110, 8110Resin, GTX8110Resin, Polyphenylene Ether + PS + Nylon, Polyphenylene Ether PS Nylon, Polyphenylene Ether : PS : Nylon, Polyphenylene Ether / PS / Nylon, Polyphenylene Ether - PS - Nylon, Polyphenylene Ether _ PS _ Nylon, Polyphenylene Ether PS Nylon, PPE+PS+Nylon, PPEPSNylon, PPE:PS:Nylon, PPE/PS/Nylon, PPE-PS-Nylon, PPE_PS_Nylon, PPE PS Nylon, Polyphenylene Ether, PPE, SABIC IP Euro, PolyphenyleneEtherPSNylon, PolyphenyleneEther, PolyphenyleneEther_PS_Nylon, 8110GTX
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Melt Temperature
°F
  
Calibration Temp, First
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
3Yield
480*10*4 sp=62mm
580*10*4
680*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.