IDES Prospector Already have an account? Login Here

IDES

KIBITON® Q-Resin PB-5900

Styrene Butadiene Block Copolymer

Supplied by CHI MEI CORPORATION

The technical datasheet with complete property values for KIBITON® Q-Resin PB-5900 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Excellent Printability
  • Good Flexibility
  • High Clarity
  • High Gloss
  • High Rigidity
Uses 
  • Appliances
  • Packaging
  • Toys
Agency Ratings 
RoHS Compliance 
Appearance 
  • Clear/Transparent
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (0.125 in)
psi
 ASTM D638
Flexural Modulus 3 (0.250 in)
psi
 ASTM D790
Flexural Strength 3 (0.250 in)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.250 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature 4
°F
 ASTM D1525 5
Optical
Nominal Value
Unit
Test Method
Haze (125 mil)
%
 ASTM D1003
Related Terminology
This supplier and product may also be known by these terms: ChiMei

Product names can be difficult to match. You may have searched any one of these terms to find this product: KIBITON® Q-Resin PB-5900, KIBITON QResin PB5900, KIBITON® Q-Resin , KIBITON QResin, KIBITON® Q:Resin, KIBITON® Q/Resin, KIBITON® Q+Resin, KIBITON® Q_Resin, KIBITON® Q Resin, KIBITONQResinPB5900, KIBITONQResin, KIBITON Q_Resin, KIBITON Q Resin, KIBITONQ_Resin, PB, Q-ResinPB-5900, QResinPB5900, Q:ResinPB:5900, Q/ResinPB/5900, Q+ResinPB+5900, Q_ResinPB_5900, Q ResinPB 5900, QResinPB, ResinPB5900, Q-ResinPB, Q:ResinPB, Q/ResinPB, Q+ResinPB, Q_ResinPB, Q ResinPB, PB-5900, PB5900, PB:5900, PB/5900, PB+5900, PB_5900, PB 5900, Styrene Butadiene Block Copolymer, SBC, Thermoplastic Elastomer, TPE, sb, Chi Mei, StyreneButadieneBlockCopolymer, ThermoplasticElastomer, 5900PB, ResinPBQ
Features
Features may also be described by the following terms: High Clarity, Good Flexibility, Flexible, High Gloss, Excellent Printability, Printable, High Rigidity.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Holding Pressure
psi
  
Back Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
20.24 in/min
30.11 in/min
40.125 in
5Rate A (50°C/h)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.