|
Density
|
|
g/cm³
|
ISO 1183 |
|
Melt Mass-Flow Rate (MFR)
|
|
|
ISO 1133 |
|
190°C/2.16 kg
|
|
g/10 min
|
|
|
190°C/5.0 kg
|
|
g/10 min
|
|
|
Melt Volume-Flow Rate (MVR)
|
|
|
ISO 1133 |
|
190°C/2.16 kg
|
|
in³/10min
|
|
|
190°C/5.0 kg
|
|
in³/10min
|
|
|
Environmental Stress-Cracking Resistance 2 (140°F, 0.118 in, Rhodacal-DS10, Compression Molded)
|
|
hr
|
Internal Method |
|
Tensile Modulus (0.0787 in, Compression Molded)
|
|
psi
|
ISO 527-2/1BA/50 |
|
Tensile Stress
|
|
|
ISO 527-2/1BA/50 |
|
Yield, 0.0787 in, Compression Molded
|
|
psi
|
|
|
Break, 0.0787 in, Compression Molded
|
|
psi
|
|
|
Tensile Strain (Break, 0.0787 in, Compression Molded)
|
|
%
|
ISO 527-2/1BA/50 |
|
Tensile Creep Modulus
|
|
|
ISO 899-1 |
|
1 hr
|
|
psi
|
|
|
1000 hr
|
|
psi
|
|
|
Notched Izod Impact Strength
|
|
|
ISO 180/A |
|
-22°F
|
|
ft·lb/in²
|
|
|
73°F
|
|
ft·lb/in²
|
|
|
Shore Hardness (Shore D)
|
|
|
ISO 868 |
|
Heat Deflection Temperature (66 psi, Unannealed)
|
|
°F
|
ISO 75-2/B |
|
Vicat Softening Temperature
|
|
°F
|
ISO 306/A |
|
Melting Temperature (DSC)
|
|
°F
|
DIN 53765 |
|
Enthalpy Change
|
|
J/g
|
DIN 53765 |
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® HDPE M40053SE, SABIC HDPE M40053SE, SABIC® HDPE , SABIC HDPE, SABICHDPEM40053SE, SABICHDPE, HDPEM 40053 SE, HDPEM40053SE, HDPEM40053, HDPE, M 40053 SE, M40053SE, M40053, 40053SE, Polyethylene, High Density, Polyethylene High Density, Polyethylene, PE, SABIC, PolyethyleneHighDensity, 40053M, 40053HDPEM
|
|
Features may also be described by the following terms: Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Processability, Easy Processing, High Stiffness, Good Surface Finish, Good Weather Resistance, Weather Resistant.
|
|
Uses may also be described by the following terms: Industrial Containers, Industrial Containers, Household Goods, Housewares.
|